Instructions / Assembly
Questions? Email info@greenesfence.com or call 800-622-5510 Monday - Friday 8am-5pm EST
VALUE CEDAR RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
MODEL #
RCECTB
DIMENSIONS
4ft. wide x 8ft. long
x 10.5in. high
PACKAGE CONTENTS + (6) Screws
x6 x6
11in. x 2.5in. x 2.5in.
Tall Posts
4ft. x 3.5 in.
Boards
3.5in. x 3.5in.
Decorative Caps
x21
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
info@greenesfence.com
INSTALL ATION SUPPORT
youtube.com/greenesfence
.
CONNECT THREE TALL POSTS TOGETHER WITH TWO BOARDS.
Holding a Board in one hand with the notched ends facing up, line up
the groove on a Tall Post and slide it down over one end of the Board.
Slide another Tall Post down over the other end. With the same Tall
Post, slide the second Board through the groove finishing with another
Tall Post at the end to complete one 8ft. wall.
Repeat step one to complete a second wall.
.
CONNECT THE TWO WALLS TOGETHER WITH THREE BOARDS.
Take a Board and slide down over the top of a Tall Post. Connect
the same Board to an adjacent Tall Post on the second wall. Do the
same with two more Boards completing a 4ft. x 8ft. rectangle or
two connected 4ft. x 4ft. squares.
.
ADD A SECOND AND THIRD BOARD TO ALL WALLS
& ATTACH DECORATIVE CAPS
Add Boards, one at a time, directly on top of each existing Board in
the Frame. Push the Boards down evenly between the tops of the
Tall Posts. If needed, tap snugly into place with a rubber mallet.
Attach each Decorative Cap to a Tall Post with a screwdriver and
one Screw. We recommend drilling a pilot hole first for each Screw.