Specification

ManualsBrandsGreengate ManualsElectrical2000 sq. ft. 10/30-Volt DC MicroSet Dual Technology Occupancy Sensor with Daylight Sensor

Technical Data

Effective November 5, 2014

OAC-DT – MicroSet Dual Tech Low

Voltage Ceiling Sensor

Overview

The Dual Technology sensor’s combination of Ultrasonic and Passive

Infrared technologies offers the most complete sensing equipment

available today. MicroSet self-adjusting Dual Technology sensors

drastically simplify and reduce a contractor’s installation and

adjustment time period.

Features

MicroSet self-adjusting Time Delay and sensitivity

Optional built-in light level sensor

Optional BAS/HVAC isolated relay

Products tested to NEMA WD 7 - 2011 Occupancy

Motion Sensors Standard

Selectable Walk-Through Mode

Dual Relay control

Catalog# Prepared by

Project Date

Comments Type

Technical Data

PIR

Activated

Ultrasonic

Activated

MicroSet

Self-Adjusting

Summary of content (4 pages)

PAGE 1
Technical Data Effective November 5, 2014 OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor Catalog# Prepared by Project Date Comments Type Overview The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period.
PAGE 2
Technical Data November 2014 OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor Specifications Technology Power Requirements Time Delays Coverage Light Level Sensing (-R Models) Operating Environment Housing Size Mounting LED Indicators Standards 2 Passive Infrared (PIR) and Ultrasonic (US) Input 10-30 VDC from Greengate Switchpack or Greengate system Maximum current needed is 25mA per sensor Output Open collector output to switch up to ten Greengate Switchpacks BAS with Isolated Form C Rela
PAGE 3
Technical Data OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor November 2014 Wiring Diagrams HOT OAC-DT-2000-R Model LINE RED (15 VDC ) OAC AND VAC MANUAL MODE OPERATION: BLUE (CONTROL) 1. SWITCHES ARE REQUIRED TO TURN CORRESPONDING LOADS ON. BLUE **HOT RED (10-30 VDC) HOT BLUE (CONTROL-OCC) LINE YELLOW (CONTROL-OCC/DAY) **USE BLACK LEAD FOR 120 VAC. USE ORANGE LEAD FOR 277 VAC. CAP UNUSED LEAD.
PAGE 4
Technical Data OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor Controls LEDs (-R model only) Override (-R model only) Sweep Full/Half Logic (-R model only) Daylight Sensor Adjustment Ultrasonic Sensitivity Adjustment PIR Detector ON 1 2 3 4 5 6 7 8 9 10 11 12 Ordering Catalog # Maximum Room Size Field of View Freqency Features OAC-DT-2000-R OAC-DT-2000 OAC-DT-1000-R OAC-DT-1000 OAC-DT-0501-R OAC-DT-0501 2,000 sq. ft. 2,000 sq. ft. 1,000 sq. ft. 1,000 sq. ft. 500 sq. ft.