Specification Sheet

ManualsBrandsGreengate ManualsElectrical1000 sq. ft. 120/277-Volt AC Dual Technology Passive and Ultrasonic Infrared Occupancy Sensor with Neutral

Technical Data

Effective March 1, 2018

ONW-D – NeoSwitch Dual Tech/Dual Relay

Wall Switch Sensor (Neutral Required)

Overview

The Dual Technology Dual Relay Occupancy Sensing Wall Switch

is a motion sensing lighting control and conventional wall switch

all-in-one that is used for energy savings and convenience. The unit

contains two relays that allow the control of two separate loads.

Features

Air-gap switch ensures no leakage current to load

Selectable built-in light level sensor

NEMA WD7 Guide robotic method utilized to verify coverage

patterns

Additional pushbutton with light/fan graphic included

LED rated

Catalog# Prepared by

Project Date

Comments Type

Technical Data

PIR

Activated

Ultrasonic

Activated

Self-Adjusting

Summary of content (4 pages)

PAGE 1
Technical Data Effective March 1, 2018 ONW-D – NeoSwitch Dual Tech/Dual Relay Wall Switch Sensor (Neutral Required) Catalog# Prepared by Project Date Comments Type Overview The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads.
PAGE 2
Technical Data March 2018 ONW-D – NeoSwitch Dual Tech/Dual Relay Wall Switch Sensor (Neutral Required) Specifications Technology Electrical Ratings (Per Relay) Ballast Compatibility Time Delays Coverage Light Level Sensing Operating Environment Housing Size LED Indicators Standards 2 Passive Infrared (PIR) and Ultrasonic (US) 120 VAC: Incandescent/Tungsten – Max. load: 6.7 amps, 800W, 50/60 Hz Fluorescent/Ballast – Max.
PAGE 3
Technical Data ONW-D – NeoSwitch Dual Tech/Dual Relay Wall Switch Sensor (Neutral Required) March 2018 Wiring Diagrams 120/277 VAC dual level dual circuit wiring diagram 120/277 VAC dual level single circuit wiring diagram 120/277 VAC BLACK BLUE RED RED CIRCUIT 1 120/277 VAC BLACK BLUE CIRCUIT 2 120/277 VAC RED RED GREEN GREEN WHITE LOAD 2 WHITE LOAD 2 LOAD 1 LOAD 1 GROUND GROUND CIRCUIT 1 NEUTRAL NEUTRAL Three-way wiring diagram: Lights will turn OFF automatically when sen
PAGE 4
Technical Data March 2018 ONW-D – NeoSwitch Dual Tech/Dual Relay Wall Switch Sensor (Neutral Required) Controls DIP Switch Legend Time Delay Activation Relay 1 PIR Sensitivity Walk-Through Mode Maintain Lights On Override Bathroom Relay Swap Relay 2 Daylighting Relay 1 Relay 2 DIP Switch 1 2 Auto* Auto Auto Full Disable Either Disable Disable Normal Disable Disable 5 Minutes Manual Manual 50% Enable Both Enable