Manual

ManualsBrandsGreenGuard ManualsFor HomePLYGOOD Ultra Sheathing

1-800-241-4402 www.green-guard.com

INSTL-PGU-ESPAN

11/04

• Install diagonal corner bracing that complies with

code requirements for racking strength.

• Install GreenGuard

PLYGOOD Sheathing vertically

with seams located on studs.

• Fasten GreenGuard

PLYGOOD Sheathing with 1’’

(25 mm) plastic cap nails or galvanized roofing nails.

• 16 gauge staples may be used if they are installed

with crown parallel to framing members (as long as

they are not overdriven).

• Fastening Pattern Recommendations:

Fastener Location: Fastening Pattern:

Bottom Edge 12’’ Apart (305 mm)

Studs 16’’ Apart (406 mm)

• Use round “Nail Dots” as a guide for attachment to

studs.

• The “+” in the adjacent drawing indicates fastener

locations.

Revestimiento GreenGuard

PLYGOOD

Guía de Instalación

• En las esquinas instale jabalcones diagonales que

cumplan con los requisitos del código en cuanto a

resistencia al alabeo.

• Instale el revestimiento GreenGuard

PLYGOOD

verticalmente con las juntas situados sobre las

columnas.

• Fije el revestimiento GreenGuard

PLYGOOD con

clavos de cabeza plástico o clavos galvanizados

para techos de 1 pulgada (25 mm).

• Se puede utilizar grapas calibre 16 si se instalan

con la corona paralela a los largueros del encofrado

(siempre y cuando no se claven en exceso).

• Recomendaciones para la fijación:

Puntos de fijación Esquema de la fijación:

Borde inferior Cada 12 pulgadas (305 mm)

Columnas Cada 16 pulgadas (406 mm)

• Use “puntos” redondos como guía para la fijación

a las columnas.

• El símbolo “+” de la ilustración al lado indica los

puntos de fijación.

12"12"

Before installing GreenGuard

obtain installation instructions from your supplier or Pactiv

Building Products, Atlanta GA 30328 1-800-241-4402

WARNING: Foam plastic insulation will ignite if exposed to fire of sufficient heat and intensity. Protect

foam insulation from exposure to open flame or other ignition sources during shipment, storage, and installation.

Sheathing & Roofing Recovery Board

GreenGuard

PLYGOOD

Complies with: BOCA 95-44, SBCCI 94107, CA BHF TB 1046, MN Dept. of Energy Chapter 7640,

Und. Lab. Inc.

, Classified - See Classification Certificate A184.

Nail every 16 inches.

Use line as guide.

Nail every 16 inches.

Use line as guide.

Before installing GreenGuard

obtain installation instructions from your supplier or Pactiv

Building Products, Atlanta GA 30328 1-800-241-4402

WARNING: Foam plastic insulation will ignite if exposed to fire of sufficient heat and intensity. Protect

foam insulation from exposure to open flame or other ignition sources during shipment, storage, and installation.

Sheathing & Roofing Recovery Board

GreenGuard

PLYGOOD

Complies with: BOCA 95-44, SBCCI 94107, CA BHF TB 1046, MN Dept. of Energy Chapter 7640,

Und. Lab. Inc.

, Classified - See Classification Certificate A184.

Nail every 16 inches.

Use line as guide.

Nail every 16 inches.

Use line as guide.

APPROVED

Pactiv’s GreenGuard

PLYGOOD

Sheathing

is an ENERGY STAR qualified product as a

part of EPA’s Home Sealing effort

Pactiv’s GreenGuard

PLYGOOD

Sheathing

is an ENERGY STAR qualified product as a

part of EPA’s Home Sealing effort

GreenGuard

PLYGOOD

Sheathing

Installation Guidelines