Instruction Manual

ManualsBrandsGreenheck Fan ManualsFaxesGreenheck Centrifugal Inline Fans SQ/BSQ

Centrifugal Inline Fans

Models SQ and BSQ

Direct and Belt Drive

April

2012

Summary of content (48 pages)

PAGE 1
Centrifugal Inline Fans Models SQ and BSQ Direct and Belt Drive ® April 2012
PAGE 2
Models SQ and BSQ Centrifugal Square Inline Duct Fans Table of Contents Standard Construction Features . . . . . . . . 4-5 Typical Installation . . . . . . . . . . . . . . . . . . . . 14 Vari-Green Motor & Control Options . . . . 6-7 Model Number Code . . . . . . . . . . . . . . . . . . 14 Options and Accessories . . . . . . . . . . . . . . . 8 Direct Drive . . . . . . . . . . . . . . . . . . . . . . 15-23 Filter Options . . . . . . . . . . . . . . . . . . . . . . . . . 9 Belt Drive . . . . .
PAGE 3
Models SQ and BSQ Centrifugal Square Inline Duct Fans Model Comparison       BSQ            27,200 4 $ Maximum Volume (cfm) $ Mixed Flow 2 Propeller/Axial 5,000 Centrifugal   Direct High Temp (above 200°F ) High Wind (150 mph) Smoke Control (UL) Performance Relative Cost   Impeller Type Maximum Static Pressure (in.
PAGE 4
Standard Construction Features Model SQ Direct Drive 3 5 4 2 1 Model BSQ Belt Drive 5 2 9 7 4 3 8 1 4 6
PAGE 5
Standard Construction Features 1 Cabinet Construction The fan housing is constructed of rigid structural members and formed galvanized steel panels. (Aluminum construction is optional in all SQ sizes 60‑160 and in BSQ sizes 70‑300). 2 Drive Frame Constructed from heavy-gauge steel. 3 Wheel An aluminum, backward inclined, nonoverloading centrifugal wheel is utilized to deliver maximum efficiency. Each wheel is statically and dynamically balanced.
PAGE 6
Vari-Green® Options Vari-Green® Motor - Model SQ Features Greenheck’s electronically commutated (EC) Vari-Green (VG) motor combines motor technology, controllability and energy-efficiency into one single low maintenance unit and is the industry’s first fully controllable motor. When combined with Greenheck’s SQ fans, all the CFM and static pressure ranges of a belt drive can be attained with the benefits of a direct drive. ® 1.
PAGE 7
Vari-Green® Options components for variable volume. Vari-Green® Controls Transformer - Provides 24V power from the existing line voltage at the fan to the Vari-Green motor and controls. Dual voltage primary (120/240V) transformer provided with the fan. Remote Dial - Allows for remote, manual airflow adjustments. Wall plate with dial may be mounted in a standard 2x4 inch electrical junction box.
PAGE 8
Options and Accessories Aluminum Construction Coatings Speed Controllers Decorative coatings are available in sixteen standard colors. Aluminum construction is available for all direct drive sizes 60-160 and belt drive sizes 70-300. Some drive frame components may still be of galvanized construction to maintain structural integrity. Available for use with shaded pole and permanent split capacitor (PSC) motors on model SQ fans. They provide an economical means of system balancing with direct drive fans.
PAGE 9
Filter Options The filter box is designed to provide a compact and convenient clean air solution. Factory-assembled as a single unit, this fan eliminates the costly process of designing, fabricating and installing special remote filter box assemblies. Both the fan and filter section feature removable access panels on both sides to remove and replace filters, making fan maintenance simple and fast. Model Selection Procedure 1. Calculate system pressure drop and cfm requirements (not including filters). 2.
PAGE 10
Discharge Configurations The side discharge option helps to reduce system effect. It will increase performance and reduce installation labor. The most notable is reducing system effects. Note: The figure 1 example shows the air being discharged into the corner. It will take several duct lengths before the airflow becomes laminar or smooth again after making the turn. In figure 2, the fan is placed in the corner using a side discharge.
PAGE 11
Side Discharge SQ Side Discharge BSQ Side Discharge Access Door Left Side Discharge Inline Discharge Figure 4 Height Inlet Width Right Side Discharge SQ Side Discharge Duct Openings Unit Size Left Side Discharge Access Door Inline Discharge Figure 5 Height Inlet Width Right Side Discharge BSQ Side Discharge Duct Openings Width Height Unit Size Width Height 60-75 97⁄8 (251) 87⁄8 (225) 70-80-90 117⁄8 (302) 117⁄8 (302) 80-95 127⁄8 (327) 117⁄8 (302) 100 137⁄8 (352) 137⁄8 (352)
PAGE 12
Horizontal and Vertical Mounting Options All SQ and BSQ fan models can be mounted horizontally, vertically or at an angle. For ease of installation, knockouts are provided at each location where mounting brackets are shown in figures 6, 7 and 8. Optional brackets are universally adjustable to mount in any of these locations.
PAGE 13
Base Mount or Hanging Isolators Standing Neoprene Isolator j h L j Standing Spring Isolator 5 ⁄8 inch (16 mm) nominal h i Hanging Neoprene Isolator h Complete isolation kits are available with either neoprene or spring isolators and are sized to match the weight of the specified fan size. The base isolator support brackets are designed to permit mounting of the fan with the motor located on top or either side.
PAGE 14
Typical Installation Models SQ and BSQ ducted inline fans are designed for the exhaust, supply or recirculation of air in a building. Typical installation requires ductwork on the inlet and outlet side of the fan. A minimum of three duct diameters is required on the inlet and outlet of the fan to minimize system effect losses. See the diagram below for a typical installation. Installations can include flexible duct connections (by others) on either the inlet or outlet side of the fan or both.
PAGE 15
SQ 60-65 - Direct Drive 1 (25) 0.55 RPM (Direct) RPM (Vari Green) 3 Density 0.075 lb/ft 3 Density 1.2 kg/m 130 12 13 (305) (330) 0.45 100 0.40 90 80 70 60 50 40 30 Direct 0.25 0.20 0.15 0.05 10 0 0.00 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). **Weight shown is largest cataloged Open Drip Proof motor. Motor HP 0.30 0.10 20 Damper size = 9 x 9 (229 x 229) Unit weight** = 26 (12) Housing thickness = 18 ga Outlet velocity = 1.828 x cfm 0.
PAGE 16
SQ 70-75 - Direct Drive 1 (25) 0.55 100 40 0.20 0.15 0.05 Damper size = 9 x 9 (229 x 229) Unit weight** = 26 (12) Housing thickness = 18 ga Outlet velocity = 1.828 x cfm 0 0.00 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). **Weight shown is largest cataloged Open Drip Proof motor. Direct 0.25 0.10 20 Motor HP 0.30 5-V 0 50 0 G 07 007 VG 5D 07 0D THE LEFT OF 60 0.35 07 5-G 0-G 07 DO NO TS ELE CT T O (330) (305) 80 0.
PAGE 17
SQ 80-85 - Direct Drive 1 (25) 0.8 180 THIS SYST EM C URVE 0.7 160 117⁄8 0.6 (406) 100 80 60 0.5 THE LEFT OF 16 120 0.4 0.3 DO NO TS ELE CT TO 15 (381) 140 Static Pressure (Pa) 15 (381) Static Pressure (in. wg) (302) 0.2 40 0.1 20 Damper size = 12 x 12 (305 x 305) Unit weight** = 41 (19) Housing thickness = 18 ga Outlet velocity = 1.021 x cfm 0.0 0 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms).
PAGE 18
SQ 90-95 - Direct Drive 1 0.9 220 200 180 117⁄8 (302) (381) (406) 100 80 60 0.5 THE LEFT OF 16 120 0.6 0.4 0.3 0.2 40 0.1 20 Damper size = 12 x 12 (305 x 305) Unit weight** = 41 (19) Housing thickness = 18 ga Outlet velocity = 1.021 x cfm 0 0.0 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). **Weight shown is largest cataloged Open Drip Proof motor.
PAGE 19
SQ 100 - Direct Drive 1 (25) 1.2 250 137⁄8 RPM (Direct) RPM (Vari Green) 3 Density 0.075 lb/ft 3 Density 1.2 kg/m 1.0 100 50 0 CU RVE 0.4 11 0.2 0.0 0 0 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). **Weight shown is largest cataloged Open Drip Proof motor. Direct 0.6 DO Damper size = 14 x 14 (356 x 356) Unit weight** = 56 (25) Housing thickness = 18 ga Outlet velocity = 0.748 x cfm Motor HP TH EL EF TO FT HIS SY ST EM 150 0.
PAGE 20
SQ 120 - Direct Drive 1 (25) 1.8 1.6 350 1.4 (483) (533) 250 200 150 1.2 1.0 0.8 0.6 25 21 300 17 19 Static Pressure (Pa) 19 (483) Static Pressure (in. wg) (403) RPM (Direct) RPM (Vari Green) 3 Density 0.075 lb/ft 3 Density 1.2 kg/m NO TS EL EC TT OT HE LEF TO FT HIS SYS TEM CUR VE 157⁄8 400 11 40 100 0.4 50 0.2 0 0.0 86 Damper size = 16 x 16 (406 x 406) Unit weight** = 67 (30) Housing thickness = 18 ga Outlet velocity = 0.
PAGE 21
SQ 130 - Direct Drive 1 (25) 1.8 200 150 CU RVE TH EL EF TO FT HIS SY STE M 250 1.2 1.0 0.8 0.6 100 0.4 50 0.2 0 0.0 TO (533) 300 Damper size = 18 x 18 (457 x 457) Unit weight** = 77 (35) Housing thickness = 18 ga Outlet velocity = 0.451 x cfm Motor HP Direct 40 86 O 0 D 0 0 Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). **Weight shown is largest cataloged Open Drip Proof motor. 11 SE LE CT (533) 1.
PAGE 22
SQ 140 - Direct Drive 1 2.1 (25) 500 RPM (Direct) RPM (Vari Green) 3 Density 0.075 lb/ft 3 Density 1.2 kg/m 197⁄8 400 (505) 22 (584) (559) 200 Static Pressure (in. wg) 23 300 1.2 0.9 0.6 100 0 0.
PAGE 23
SQ 160 - Direct Drive 1 2.8 600 2.4 500 2.0 100 0.4 0 0.0 Damper size = 23 x 23 (584 x 584) Unit weight** = 160 (73) Housing thickness = 18 ga Outlet velocity = 0.275 x cfm Direct 86 0 0 1000 2000 3000 4000 5000 6000 Volume (cfm) Dimensions shown in inches (millimeters) and weight is shown in pounds (kilograms). **Weight shown is largest cataloged Open Drip Proof motor. Motor HP TO THE LEF T OF 0.8 40 11 200 1.2 NO TS ELE CT (660) 300 DO (660) 26 1.
PAGE 24
BSQ 70 - Belt Drive (394) *14 (356) 2.5 600 (302) 15 200 (381) EFT O F THIS hp 1.5 1.0 24 86 21 50 18 10 14 DO NO TS 0.5 0.0 0 0 15 RPM HP Density 0.075 lb/ft3 THE L 117⁄8 1/4 ELE CT T O (318) Static Pressure Pa *121⁄2 400 Static Pressure in. wg 2.
PAGE 25
BSQ 80 - Belt Drive (394) *14 (356) 3.0 700 NO T O 0.0 D 0 0 15 HIS S YSTE M OF T LEF T HE 0.5 100 19 00 TT OT 1.0 15 30 SE LE C Static Pressure in. wg Static Pressure Pa (381) 200 45 15 300 1.5 70 (302) hp hp 22 117⁄8 400 3 1/4 p 116 0 79 0 200 400 21 (381) 26 (318) 1/ 2.0 RPM HP Density 0.075 lb/ft3 hp *12 ⁄2 1 500 2h 4 600 1 (25) 1/ 2.
PAGE 26
BSQ 90 - Belt Drive (394) *14 (356) 3.0 700 4 3 0 15 21 (381) IS S YST hp 23 10 TH E LEF 1.5 1/ hp 19 30 TO 1.0 0.5 O T 100 1/ EC T 200 hp 2.0 15 50 SE L 15 (381) 300 Static Pressure in. wg (302) Static Pressure Pa 117⁄8 400 2 p 91 (318) 1/ hp 26 *121⁄2 500 4 TO F TH 600 1 (25) RPM HP Density 0.075 lb/ft3 1h 3/ 2.5 EM C URV E *151⁄2 0.
PAGE 27
BSQ 100 - Belt Drive *14 (356) 3.0 4 2.5 100 0 17 21 (432) 3h hp p LE FT OF T 1.5 1.0 22 10 TH E 200 1/ 4 18 55 TO 17 (432) 300 p 2.0 56 (352) 2h 1/ 0.5 0.0 0 DO RPM HP Density 0.075 lb/ft3 25 137⁄8 400 1/ hp hp LE CT (318) Static Pressure Pa *121⁄2 500 Static Pressure in.
PAGE 28
BSQ 120 - Belt Drive *177⁄8 (454) *16 (406) 4.0 1 1/4 0 19 21 (483) RVE CU EM ST SY 1.0 21 50 18 0.5 DO 0.0 0 NO T 79 0 500 10 14 SE LE 200 100 HI S hp TO 1.5 hp EL EF hp TH 2.0 TO FT 2 3 CT (483) 300 Static Pressure in. wg Static Pressure Pa 19 400 1/ 1/ 90 (403) 500 2.5 RPM HP Density 0.075 lb/ft3 24 157⁄8 600 3.0 hp (318) 4 3/ *121⁄2 700 hp hp 3.
PAGE 29
BSQ 130 - Belt Drive *177⁄8 *16 (406) SYS T THIS OF EF T HE L OT 35 LE CT T 0.0 0 11 05 0 DO 500 50 17 20 79 N (533) 20 14 SE OT Static Pressure in. wg Static Pressure Pa 21 55 0 21 23 0.5 RPM HP Density 0.075 lb/ft3 hp p 1.0 /2 11 hp p 4h 100 2h (533) 200 1.5 1/ 21 300 hp (454) 400 2.0 3 17 ⁄8 7 1/ (318) 500 1/ *121⁄2 p 1h 600 1 (25) 4 3/ 2.5 CUR VE 3.
PAGE 30
BSQ 130HP - Belt Drive *16 1000 4.0 100 0 21 1.5 1/ 3 /2 1.0 0.5 0.0 0 DO hp N 27 70 23 90 19 90 15 90 79 0 500 11 90 1000 1500 2000 2500 cfm 21 (533) hp EFT OF THIS S Static Pressure in. wg Static Pressure Pa 200 hp (533) 300 1 21 400 2.0 hp (454) 500 2.5 4 1/ 177⁄8 600 3.0 hp (318) 700 2 1/ *121⁄2 hp 800 4 3/ 1 (25) 3.5 11 TH EL 900 RPM HP Density 0.075 lb/ft3 URV E 4.
PAGE 31
BSQ 140 - Belt Drive *177⁄8 *16 (406) 3.5 2 1 800 3.0 SYS T H IS FT 4 TO OT ON 0.0 D 0 500 40 0.5 79 0 1000 65 SE LE CT T hp TH E 1/ 1.0 LE F hp O Static Pressure in. wg 3 13 0 hp 10 100 4 90 1/ 1.5 200 (584) 23 2.0 hp 15 300 2 16 23 400 3/ 1/ hp 18 197⁄8 (505) 500 2.5 RPM HP Density 0.
PAGE 32
BSQ 140HP - Belt Drive *16 400 (584) 4 2 2 hp 1/ 3 hp hp 1 O 0 23 0 0 DO 22 70 19 00 15 30 N 60 79 0 500 1000 1500 22 (584) RPM HP Density 0.075 lb/ft3 11 T 200 3/ 1/ CT T 23 3 SE LE (505) 600 Static Pressure in.
PAGE 33
BSQ 160 - Belt Drive *201⁄2 *17 4.0 (432) 1 2 1/ (660) 300 0 HIS SY S hp 1 1.5 1 /3 /4 hp hp 1.0 0.0 0 DO T NO 59 01 10 14 11 50 87 0 0 1000 2000 3000 26 (660) 20 30 EC T L SE 0.5 RPM HP Density 0.075 lb/ft3 17 FT 2 200 100 26 1/ 2.0 LE FT O 400 2.5 TH E 26 500 hp TO (581) Static Pressure Pa 22 ⁄8 7 600 1 hp (340) 3.0 4 3/ *13 ⁄8 3 700 Static Pressure in. wg 800 1 (25) hp hp 3.
PAGE 34
BSQ 160HP - Belt Drive *17 1 (581) 26 400 (660) 1 3 3/ 4 2 1/ 3 1/ 2 hp hp 0 0 26 (660) DO N RPM HP Density 0.075 lb/ft3 hp 23 21 19 90 16 65 13 40 SE L T O 0 26 hp hp 1 200 hp 3 OF 600 2 LEF T 22 ⁄8 7 1/ EC TT (340) 800 Static Pressure in.
PAGE 35
BSQ 180 - Belt Drive *243⁄8 *18 (619) (457) 3.0 3 700 E CUR V TEM S YS TT O DO 14 30 12 20 10 SE LE C 0.0 0 45 10 80 0 59 T 0.5 16 HIS TH EL EF TO FT hp Static Pressure in. wg 4 Static Pressure Pa hp 3/ 0 28 hp hp 1.0 hp 2 /2 1 100 hp 200 3 28 (711) 300 1.5 1/ (606) 400 hp 23 ⁄8 7 2 (349) 2.0 1/ *13 ⁄4 3 500 11 2.5 600 11⁄2 (38) NO 0 1000 2000 3000 28 (711) RPM HP Density 0.
PAGE 36
BSQ 180HP - Belt Drive *18 4.0 (457) 900 2 3.5 1 2 (711) 400 300 1/ 2 1.5 1.0 200 0.5 0.0 0 0 hp hp NO 100 28 2.0 hp HE LEF TO F TH 500 4 DO 50 28 600 1 3/ 2.5 13 85 11 20 85 5 59 0 1000 2000 3000 28 (711) RPM HP Density 0.075 lb/ft3 16 237⁄8 (606) Static Pressure Pa (349) 700 hp hp 13 19 *13 ⁄4 3 3.0 hp TS EL EC TT OT 1 ⁄2 (38) Static Pressure in.
PAGE 37
BSQ 200 - Belt Drive *28 *20 (711) (508) 3.0 700 UR VE FT OF TH IS 75 11 LE 90 TH E 99 TO 0 SE D T NO 39 O 0 59 0 0 1000 2000 3000 4000 32 (813) 13 79 LE CT 0.5 0.0 0 RPM HP Density 0.075 lb/ft3 SY ST EM C hp Static Pressure in. wg hp 2 1/ hp Static Pressure Pa 2 1 hp 1.0 hp 32 4 0 3 100 1/ (813) 200 hp 32 2 (708) 300 1.5 1/ 277⁄8 400 2.0 3/ (406) 500 1 *16 hp 600 11⁄2 (38) 3 2.
PAGE 38
BSQ 200HP - Belt Drive *28 *20 (508) 2 3.0 1 700 (708) 32 300 2 hp 0 hp hp 1.5 1.0 0.5 NO T 100 1 0.0 0 DO 16 02 13 50 EFT 4 2.0 1/ 200 (813) 32 3/ RPM HP Density 0.075 lb/ft3 hp hp HE L 27 ⁄8 7 400 2 3 hp 11 10 OT (406) 500 1/ 2.5 SE LE CT T *16 600 Static Pressure in. wg Static Pressure Pa 11⁄2 (38) RVE 3.
PAGE 39
BSQ 240 - Belt Drive *327⁄8 *22 (835) (559) 3.0 5 100 0 39 1/ 2 hp TO 1.0 3/ hp 4 h p TH E 2 LE FT 1/ OF 1.5 0.5 0.0 0 DO T NO 0 56 0 39 0 2 4 34 (991) 73 LE CT 200 1 hp SE (991) 300 1 hp 0 90 39 400 2.0 3 hp 70 10 347⁄8 (886) Static Pressure Pa (483) 500 2 25 12 *19 Static Pressure in. wg 1 ⁄2 (38) RPM HP Density 0.075 lb/ft3 TH IS S YST EM 2.
PAGE 40
BSQ 240HP - Belt Drive *327⁄8 *22 5 1200 FT HIS TO EF NO40 T 39 DO 11 20 88 0 64 0 0 2 4 34 (991) 13 60 TH EL Static Pressure in. wg EC TT O SE L 1 0 0 05 0 16 Static Pressure Pa hp hp 200 hp hp 3 (991) 2 1 400 hp 39 2 1/ (886) 600 hp 347⁄8 3 1 (483) 800 2 *19 2 1/ 5 4 RPM HP Density 0.
PAGE 41
BSQ 300 - Belt Drive *34 *22 (864) (559) 3.0 2.5 SYS TE THI S OF LEF T LE CT TO TH E 5 SE 85 Static Pressure in. wg hp Static Pressure Pa 2 1/ 5 5 49 5 T (1168) DO 73 5 38 0.0 0 NO 7 61 0.5 96 37 0 46 7 1.0 hp 100 hp (1168) 200 4 3/ 46 300 hp (1064) 1.5 1 417⁄8 400 2.0 hp 2 hp 2 1/ (457) 500 1 *18 hp 3 5 600 11⁄2 (38) RPM HP Density 0.
PAGE 42
BSQ 300HP - Belt Drive *34 *22 1000 4.0 46 (1168) 400 300 200 100 0 46 38 (1168) p p 11 2.0 /2 hp 1.5 1.0 0.5 0.0 0 DO T NO /2 hp 11 96 10 40 EF TO (1064) 500 3h 2h 2.5 71 TH EL 417⁄8 600 3.0 88 0 TO (457) 700 p 77 0 CT *18 Static Pressure Pa 800 Static Pressure in. wg 11⁄2 (38) 5h 3.5 FT HI S 900 RPM HP Density 0.075 lb/ft3 E 4.
PAGE 43
BSQ 360 - Belt Drive *34 *22 (559) 3.0 7 100 0 52 42 (1321) hp SY S 81 1 FT HIS hp 1 1/ 2 h 1 hp 2 hp p 0.5 0.0 0 DO RPM HP Density 0.075 lb/ft3 70 LE FT O 1.0 hp 0 60 0 TO 200 3 1.5 hp TH E 52 (1321) 300 5 2.0 EC T (1216) 400 Static Pressure in. wg 47 ⁄8 7 Static Pressure Pa *18 (457) 500 2 2.
PAGE 44
BSQ 360HP - Belt Drive *34 1100 4.5 1000 4.0 5 900 52 (1321) 400 300 200 100 0 52 42 (1321) 1 2 1/ 2 hp 1.0 0.0 0 SYST 26 HIS hp 1.5 0.5 10 OF T hp 2.5 2.0 hp 88 LEF T (1216) 500 3 2 RPM HP Density 0.075 lb/ft3 0 THE 47 ⁄8 600 3.0 1/ hp 77 5 TO (457) 7 700 7 hp 10 EL EC T *18 TS Static Pressure Pa 800 3.5 Static Pressure in.
PAGE 45
BSQ 420 - Belt Drive *34 *22 (559) 2.5 600 10 5 (1368) 58 (1473) 200 2 0 50 (1473) hp 1.0 0.0 0 hp RPM HP Density 0.075 lb/ft3 67 0 60 5 53 5 46 5 EL EC T 0.5 58 hp hp SY STE M 1.5 2 TH EL EF TO FT HI S 53 ⁄8 7 3 hp 1/ TO Static Pressure Pa *18 (457) 400 Static Pressure in. wg 2.
PAGE 46
Direct Drive Specifications Model SQ Duct mounted supply, exhaust or return fans shall be of the centrifugal, direct driven, inline type. The fan housing shall be of a square design constructed of heavy-gauge galvanized steel or aluminum and shall include square duct mounting collars. Fan construction shall include two removable access panels located perpendicular to the motor mounting panel. The access panels must be of sufficient size to permit easy access to all interior components.
PAGE 47
Belt Drive Specifications Model BSQ Duct mounted supply, exhaust or return fans shall be of the centrifugal, belt driven, inline type. The fan housing shall be of a square design constructed of heavy-gauge galvanized steel or aluminum and shall include square duct mounting collars. Fan construction shall include two removable access panels located perpendicular to the motor mounting panel. The access panels must be of sufficient size to permit easy access to all interior components.
PAGE 48
Quick Delivery and Quick Build Programs Model Best Available Program SQ-75 through 120 and 140 BSQ-70 through 120, 140 through 180 and 240 Greenheck Fan Corporation offers an extensive selection of Quick Delivery (QD) and Quick Build (QB) offerings. The QD program is Greenheck’s stock program and the QB program offers configurable fans in one, three, five, or ten days.