Use and Care Manual

3.9. Create an irrigation program

1. Select a zone from the Program Menu. The Zone screen will now show

up.

2. Turn on the “Zone Enable” switch.

3. Select one of the four programs.

4. Turn on the “Program Enable” switch.

5. Edit “Start Time” and “End Time”. Notice that the web app calculates

and displays the irrigation duration for you.

If you wish, you may use one or more of the following options:

1. The “Weather” switch – Turn on this switch to allow the GreenIQ Smart

Garden Hub to adjust the irrigation duration based on the local

weather."

Note: It takes the system about 24 hours from installation time to

collect detailed local weather information. During this time period, the

weather-based irrigation may not be accurate. This is a normal system

behaviour."

Tip: When selecting “Weather Mode”, you need to program watering