Use and Care Manual

3.11. Define the monthly irrigation factors
For each irrigation zone screen there is a collapsible control called “Monthly
Irrigation factors (%)”. This is an optional feature, and the default factors are
set to be 100%. Use the sliders or numerical fields to determine the
percentage of required irrigation each month.
Example: Assuming Program 1.1 (Zone 1) is set to start at 20:00 and end
at 20:30. Defining 30% factor in January will result irrigation from 20:00 to
20:09 during this month (30% x 30min = 9min).
Note: If the “Weather” switch of a specific program is on, this program
ignores the monthly factors.
3.12. The irrigation progress bar
The irrigation progress bar simply shows the progress of the current
watering program starting at 0% at “Start Time” up to 100% at “End Time”.
19