Use and Care Manual

3.13. Create a lighting program
1. Select Zone 8 from the Program Menu. The Lighting screen will now
show up.
2. Select one of the four programs.
3. Turn on the “Program Enable” switch.
4. Tap “Lights On” button.
5. Select Start Time Mode: Clock, Dusk or Sunset.
6. If Clock Mode is selected, set the Start Time.
7. If Dusk or Sunset Modes are selected, you can adjust the number of
minutes before Dusk/Sunset for the lights to turn on.
8. Tap “Lights Off” button.
9. Select End Time Mode: Clock, Dawn or Sunrise.
10. If Clock Mode is selected, set the End Time.
11. If Dawn or Sunrise Modes are selected, you can adjust the number of
minutes after Dawn/Sunrise for the lights to turn off.
12. “Days of the Week to Run” – Tap this button and check the days of the
week you want this specific program to execute.
20