Cut Sheet

I N S TA L L AT I O N
6
USA Tel: [phone]
Fax: [phone]
Canada Tel: [phone]
Fax: [phone]
International Tel: [phone]
Fax: [phone]
Bit Dia. shaFt shaFt tyPe a tyPe B tyPe C
iNCh (
mm) LeNgth Dia. aUger CoMBiNatioN With sCreW PoiNt CoMBiNatioN
CoLor CoDe iNCh
mm iNCh mm Cat. No. UPC No. Cat. No. UPC No. Cat. No. UPC No.
1/4" 36 914.4 5/32 4.0 — — — — 04-03-36C 38112
(6.4 mm) 54 1371.6 5/32 4.0 — — — — 04-03-54C 38113
Blue 72 1828.8 5/32 4.0 — — — — 04-03-72C 38114
3/8" 36 914.4 3/16 4.8 06-03-36A 38067 06-03-36B 38092 06-03-36C 38117
(9.5 mm) 54 1371.6 3/16 4.8 06-03-54A 38068 06-03-54B 38093 06-03-54C 38118
Black 72 1828.8 3/16 4.8 06-03-72A 38069 06-03-72B 38094 06-03-72C 38119
1/2" 36 914.4 3/16 4.8 08-03-36A 38072 08-03-36B 38097 08-03-36C 38122
(12.7 mm) 54 1371.6 3/16 4.8 08-03-54A 38073 08-03-54B 38098 08-03-54C 38123
Green 72 1828.8 3/16 4.8 08-03-72A 38074 08-03-72B 38099 08-03-72C 38124
9/16" 36 914.4 3/16 4.8 09-03-36A 38077 09-03-36B 38102 — —
(14.3 mm) 54 1371.6 3/16 4.8 09-03-54A 38078 09-03-54B 38103 09-03-54C 38128
Orange 72 1828.8 3/16 4.8 09-03-72A 38079 09-03-72B 38104 09-03-72C 38129
3/4" 36 914.4 1/4 6.4 12-04-36A 38082 — — — —
(19.1 mm) 54 1371.6 1/4 6.4 12-04-54A 38083 — — 12-04-54C 38133
Red 72 1828.8 1/4 6.4 12-04-72A 38084 — — 12-04-72C 38134
1" 36 914.4 1/4 6.4 16-04-36A 38087 — — — —
(25.4 mm) 54 1371.6 1/4 6.4 16-04-54A 38088 — — — —
White 72 1828.8 1/4 6.4 16-04-72A 38089 — — — —
Type A, Auger
Type B,
Combination with
Screw Point
Type C,
Combination
D'VersiBIT
®
System
Cat. No. UPC No. DesCriPtioN
99104 99104 54" x 1" Shipping Tube B with
End (Sold only in minimum
quantity of 6 in same length.)
99105 99105 72" x 1" Shipping Tube B with
End (Sold only in minimum
quantity of 6 in same length.)
D'VersiBIT
®
Starter Kit
• All the tools to complete a typical wiring job.
• Includes 09-03-54B bit, 712P placement tool and 150 pulling grip.
Cat. No. UPC No. DesCriPtioN
DBITKIT 01630 D'VersiBIT Kit with 9/16" drill bit, placement tool and grip for pull-
ing 1/2" OD wire
• Wood-type auger bit with
screw point.
• Pulls itself through wood,
avoids walking or skidding.
• Excellent for drilling in
soft woods or through thin
sections.
• Slow back-taper allows for
easy retrieval.
• For aggressive chip removal
in many types of woods.
• Screw point for easy starting
and pulling through wood.
• With screw point removed,
this bit can be ground to
function like a standard
combination bit.
• For drilling in tough woods
and thick obstacles.
• Drilling speed relative to
pressure applied.
• Chips can be brought
easily out of the hole.