INSTRUCTION MANUAL GMX Modular Materials Cart System Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 52066858 REV 1 © 2013 Greenlee Textron Inc.
GMX Modular Materials Cart System Table of Contents Description Description..................................................................... 2 The Greenlee GMX Modular Materials Cart System is intended for transporting and dispensing job site materials. Patent pending. Safety............................................................................. 2 Purpose of this Manual.................................................. 2 Important Safety Information.........................................
GMX Modular Materials Cart System IMPORTANT SAFETY INFORMATION SAFETY ALERT SYMBOL Keep hands and feet clear when loading and unloading material. Failure to observe this precaution may result in injury or property damage. This symbol is used to call your attention to hazards or unsafe practices which could result in an injury or property damage. The signal word, defined below, indicates the severity of the hazard.
GMX Modular Materials Cart System GMX Multi-Purpose Material Cart Specifications 3 Height ..................................................... 4.6" (116.8 mm) Width..................................................... 28.1" (713.7 mm) Length ................................................ 50.1" (1272.5 mm) Weight.....................................................43.5 lb (19.7 kg) Parts List Key Part No. Description Qty 1 Frame.....................................................
GMX Modular Materials Cart System GMX Multi-Purpose Material Cart (cont’d) Quick Connect Casters 1. Position caster as shown in Figure 1. 2. Slide into caster groove until retained by hooks. 1 2 Hook Hook Figure 1 Figure 2 Quick Connect Accessories 1. Position accessory as shown in Figure 3. 2. Slide accessory until lock tab is under frame base, and then drop into pocket until gravity hook is engaged. 2 Gravity Hook 1 Lock Tab Figure 3 Greenlee / A Textron Company Figure 4 5 4455 Boeing Dr.
GMX Modular Materials Cart System GMX-661 Push Handle with Base Shelf Wood Shelf Assembly Instructions 1. Place 2 x 4 wood base shelf inside cart frame. 2. Refer to “Quick Connect Accessories” for handle installation. Handle Specifications Height ................................................... 32.7" (830.5 mm) Width..................................................... 28.3" (718.8 mm) Length ................................................ 57.9" (1470.6 mm) Total Weight..............................
GMX Modular Materials Cart System GMX-668 Conduit and Pipe Rack Conduit Tree Assembly Instructions Refer to “Quick Connect Accessories” for conduit tree installation. Specifications Height ................................................. 55.0" (1397.0 mm) Width..................................................... 28.3" (718.8 mm) Length ................................................ 48.5" (1231.9 mm) Total Weight.............................................68.5 lb (31.1 kg) Capacity Per Bin............
GMX Modular Materials Cart System GMX-670 Master Bundler Assembly Instructions Master Bundler Ends Refer to “Quick Connect Accessories” for master bundler end installation. Specifications Height ................................................... 36.4" (924.5 mm) Width..................................................... 28.3" (718.8 mm) Length ................................................ 48.1" (1221.7 mm) Total Weight...................................................44 lb (20 kg) Capacity.........
GMX Modular Materials Cart System GMX-910 Wire Dispenser Assembly Instructions Wire Guide 1. Refer to “Quick Connect Accessories” for frame end installation. 2. Cross arms must be placed inside retaining brackets on top of retaining pins. Note: Fasteners supplied with frame ends may be used to obtain permanent assembly. 3. Position spindles on cross arms and secure with fasteners. Note: Position spindles as shown in assembled view to achieve standard capacity rating.
GMX Modular Materials Cart System GMX-662 Mesh Basket Assembly Instructions Bottom Panel End Panel 1. Place bottom panel inside cart frame with wire mesh on top side. 2. Refer to “Quick Connect Accessories” for end panel installation. 3. Position side panels within end panel retaining brackets on top of retaining pins in four places for each side. Secure with fasteners provided. Retaining Bracket Retaining Pin Specifications Frame End Height ................................................... 32.
GMX Modular Materials Cart System GMX-663 Shelving Unit, 4-tier Assembly Instructions Top Shelf Note: Shelves may be positioned up or down. 1. Place 2 x 4 wood base shelf inside cart frame. 2. Refer to “Quick Connect Accessories” for shelf end installation. 3. Set top shelf on frame ends. Position as shown in assembled view. 4. Assemble middle shelves from ends as shown. Specifications Middle Shelves Height ................................................. 60.2" (1529.0 mm) Width.......................
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 An ISO 9001 Company • Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.
