Installation Manual
GMX Modular Materials Cart System
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
10
Assembly Instructions
1. Place bottom panel inside cart frame with wire mesh
on top side.
2. Refer to “Quick Connect Accessories” for end panel
installation.
3. Position side panels within end panel retaining
brackets on top of retaining pins in four places for
each side. Secure with fasteners provided.
Specifications
Height .................................................. 32.8" (833.1 mm)
Width ....................................................28.3" (718.8 mm)
Length ...............................................50.1" (1272.5 mm)
Weight
End ....................................................27 lb (12.3 kg)
Side ................................................ 24.3 lb (11.0 kg)
Bottom .............................................13.2 lb (5.9 kg)
Total .............................................115.8 lb (52.5 kg)
Capacity (evenly distributed) ...............1600 lb (725.7 kg)
Parts List
Key Part No. Description Qty
1 Frame end .............................................2
2 Frame side ............................................2
3 52066695 Frame bottom .......................................1
4 Bolt, 1/4-20 x 2 carriage .......................8
5 Washer, 1/4 at .....................................8
6 Nut, 1/4-20 Nylock ................................8
7 52065801 Cap plug, 1 x 2 rect. .............................4
8 52065760 Decal, identication ..............................2
GMX-662 Mesh Basket
3
4, 5, 6
7
2
1
8
Retaining
Bracket
Bottom Panel
Retaining
Pin
Frame End
End Panel
Side Panel
Note: Side frame end tabs must
be retained by pin on bottom
and bolt on top (8 places).