HUIXIAN SUNRISE POWER SOURCE CO., LTD Ni-Cd Rechargeable Battery Specification Sunrise Power Source Co.,Ltd HUIXIAN SUNRISE POWER SOURCE CO.
HUIXIAN SUNRISE POWER SOURCE CO., LTD 1 APPLICATIONS The specification applies to the following sealed Ni-CD rechargeable battery made by SUNRISE. TYPE:NI-CD APPLICATION: Electric Tools and Electric toys Etc. 2 WORKING THEORY The negative of Sunrise Nickel-Cadmium cylindrical battery is metal of Cadmium, the positive is NiOOH, The electrolyte is NaOH of high purity.
HUIXIAN SUNRISE POWER SOURCE CO., LTD -ΔV: Duration: 15mV/cell Input 120%-130% of rated capacity 4. 6 Operate temperature range :( Max relative humidity:85%) Standard charge : ﹣10~+50℃ Quick charge : 0~+55℃ Trickle charge : 0~+50℃ Characteristic curve Discharge : 0~+65℃ 4. 7 Storage temperature range (Max relative humidity:85%) Within six months: ﹣20~+45℃ Within two years: ﹣20~+35℃ Within a month: ﹣20~+55℃ Within a week: ﹣20~+65℃ 5.
HUIXIAN SUNRISE POWER SOURCE CO., LTD [6] 0.2 C discharge to 1.0 V/piece 6. BATTERY PERFORMANCE 6. 1Test condit ion The following test conditions for new battery apply (within one month after the shipment), before charging the battery should be in first test conditions with 0.2 C5A constant exile to terminate electric voltage of 1.0 V/only; Test conditions: Temperature: + 20 ± 5 ℃ Humidity: 45% ~ 85% Note: standard charging methods: (0.2 C5A) charging 7.5 hours Normal charging methods: (0.
HUIXIAN SUNRISE POWER SOURCE CO., LTD Over charge hour ≥5 No leakage or def or mation 0. 05C 5 A charge for 48 day s, then dischar ge at 0. 2C 5 A End Volt age is 0. 8 V/ cell Ambient Tem perat ure: 20 ± 2℃ Refer .t o Not e Charge retent ion mAh ≥(65%CN) St andard charge; St orage of 28 day s; St andard discharge Cycle lif e Cycle ≥50 0 IE C61951- 2(7.4. 1. 1.
HUIXIAN SUNRISE POWER SOURCE CO., LTD board at a height of 450mm(17.716 inch). 6.6 Safety performance 6.6.1 Over discharge External resistance, make the battery a discharge 24 hours (external resistance (m Ω) = 1.2 V × n × 1000/2 C5A), battery no leakage deformation. 6.6.2 safety valve Test method: 0.2 C5A discharge battery to 0 V, then increase the discharge current to 1.0 C5A, and keep the 1 hour. The battery not burst, no explosion, allowing the liquid leakage and deformation. 6.6.