Product Description



Document: Manual:Smartplantsensor Owner: StanislavShults
Version: 0.3 Date: 01.06.2020
greensensGmbH,Karlstrasse22,65185,Wiesbaden,Germany

5. Sensorinstallation:
a. Afteryousuccessfullyregisteryoursensor,pleaseputinsideyour
plantpot,withsolarcelldirectionlightsource.Foreachplant,you
needonesensor.


b. Sensorpoweredwithsolarcell,thereforeitisveryimportantto
makesurethatsensorhasenoughlight.Please
avoidsensorsshading
withleavesoranyotherobstacles.Likeonthefirstplant(lefton
picture)youcantiltsensoralittlebackforthebetterlightfalling.
About10–15degreewillbeenough.
c. Onthefrontsideofsensoryoufindaline,whichshowsyou
whereat
leastshouldtopofthesoil.Ifthesensorinstallednotdeepenough
thismayleadtobacksoilmoisturereadings.
