Installation & Assembly

Attached to Mesh
Tools needed:
 Drill or Air Compressor
 Mesh
 Zip Ties
1. Install mesh in the whole surface you are installing the product using a drill or
air compressor.
2. Snap panels together where the is, assembling a column the size of
the surface´s height.
3. Make sure that the assembly of the panels is uniform and connectors all
match the same side.
4. Hang the line of panels using zip ties from the top and middle where the green
marks are
5. Zip tie the rest of the line of panels randomly as needed so they are firmly
attached to the wall.
6. Repeat step 2 and snap the new line to previously installed line of panels
where is.
6. Repeat Steps 4 and 5 zip tying where needed
7. Continue until the whole area is covered and ready.
Example of the product attached to Mesh