250 Owner’s Manual
Welcome pureAir 250 by GreenTech Environmental is an air purifier with multiple technologies that each contribute as a part of an air and surface purification solution. Using Filtration, Bipolar Ionization, and Ozone, pureAir 250 is able to remove some of the toughest odors and contaminants for a noticeably cleaner and fresher space. pureAir 250 is easily set up and requires minimal maintenance to function at a high level of efficiency.
Table of Contents Product Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warnings & Cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warnings & Cautions Please read this owner’s manual carefully before installing and operating this unit. Warnings Turn the unit off before any cleaning or maintenance. Do not use the unit if the POWER SUPPLY is damaged. Use only the POWER SUPPLY that comes with the unit. Do not use outdoors or on wet surfaces. Do not handle the unit with wet hands. Do not operate this unit in areas with flammable or combustible products or vapors present.
Specifications Electrical Power: 120 VAC / 60Hz Power Consumption: 3.0 W Mechanical 3.1 CFM Fan Size Dimensions: 4.72” H x 2.28” W x 3.15” D Weight: 8.8 oz Warranty 1 Year Manufacturer’s Warranty Online Warranty Registration www.GreenTechEnv.
Diagram - Front Grill Mode Lights Purifier Button Power/Fan Button 6
Diagram - Rear Filter Recess Filters Filter Recess Tab 12V DC Power Plug 7
Installation Please inspect your pureAir 250 & Power Supply for damage prior to use. 1. Find a suitable location to set up your 250. An ideal location is on a tabletop or shelf. 2. Plug the POWER SUPPLY into the nearest OUTLET. 3. Insert the POWER SUPPLY into the REAR PLUG on the unit. 4. Press the POWER/FAN BUTTON to turn the unit on. The unit’s original setting is in LOW MODE with LOW FAN SPEED.
Operation Purification Control Press the PURIFIER BUTTON to cycle between Low Mode and High Mode. Fan Speed Press the POWER/FAN BUTTON to cycle through Power On, Fan Speed 1, Fan Speed 2, and Power Off.
Cleaning To keep your pureAir 250 working at peak efficiency, clean your rear filter on a monthly basis. 1. Turn your pureAir 250 OFF. 2. Remove the POWER SUPPLY from your unit. 3. Press the REAR TAB up and remove the FILTER COVER PLATE. 4. Remove the FILTERS. 5. Wash the FILTERS under warm water. 6. Let the FILTERS air dry. 7. Wipe the REAR PANEL, FILTER RECESS, and GRILL with a damp soft cloth. 8. Replace the dry FILTERS in the REAR of the unit. 9. Replace the FILTER COVER PLATE. 10.
Maintenance Your pureAir 250 requires no maintenance, aside from cleaning the rear filter when necessary. If your pureAir 250 stops working or you notice anything not functioning properly, turn the unit off immediately and remove the POWER SUPPLY. Contact your Dealer or GreenTech Environmental for further instructions regarding the repair or replacement of your unit. www.GreenTechEnv.
Limited Warranty Information Your pureAir 250 Small Room Air Purifier (Product) is warranted to be free from all defects in material and workmanship in normal household use for a period of 1 Year from date of purchase. The warranty is granted only to the original purchaser. The warranty is subject to the following provisions: Any damages or malfunctions caused by negligence, abuse, or use not in accordance with the Product Owner’s Manual are not covered by this warranty.