Use and Care Manual

13
Your pureHeat GARAGE & PATIO should be maintenance free for many years, but
sometimes the unexpected happens. If you have any trouble with your unit, contact
GreenTech Environmental by phone or visit www.GreenTechEnv.com/Support.
To extend the life of your pureHeat GARAGE & PATIO, perform regular cleanings with a
damp cloth. Do not disassemble the unit; clean only the exterior.
To prevent accidents, or save some space, store your pureHeat GARAGE & PATIO in a
cool, dry place. Perform a cleaning and allow it to dry before packing it away.
Unit Fails to Turn On
First, check to ensure your unit is plugged in and the power switch on the rear is in the
“on” position. If these have already been checked, your Tip-Over Safety Switch may be
stuck. Tilt the unit 90° to the side and then back into a standing position. Set your heat
level to P3 to make sure it is working.
If your unit still won’t turn on, contact GreenTech Environmental Customer Service.
www.GreenTechEnv.com/Support
MAINTENANCE
CLEANING
STORAGE
TROUBLESHOOTING
TURN PUREHEAT GARAGE & PATIO OFF AND DISCONNECT FROM THE OUTLET BEFORE CLEANING.