Owner's Manual

6
SETTING UP SNUG
USING SNUG
1. Remove pureHeat SNUG from its’ packaging.
2. Find an unobstructed outlet to place pureHeat SNUG.
1. Flip the POWER SWITCH, along the right side of the unit, to the ON position.
2. Set your MODE and desired TEMPERATURE using the CONTROL PANEL on the top
of the unit.
FOR YOUR SAFETY, READ ALL WARNINGS & CAUTIONS (PAGE 4) AND USAGE (PAGE 6-7)
BEFORE USING PUREHEAT SNUG.
INSPECT THE UNIT FOR DAMAGE BEFORE SETUP OR USE.