Owner's Manual

7
USING SNUG (Continued)
Modes
Changing your MODE adjusts the fan speed output, which changes the effective
heating range of pureHeat SNUG. Press the MODE BUTTON on the control panel to
switch between ‘LOW’ and ‘HIGH’ Mode.
Temperature
Use either the COOLER or WARMER BUTTONS on the control panel to adjust
pureHeat SNUG to your desired temperature.
Auto Shut-Off Timer
The timer feature can be used to automatically turn pureHeat SNUG OFF after a set
amount of time.
Press the TIMER BUTTON on the control panel to adjust the shut-off time by 1-hour
increments. (1-9 Hours)
To turn the timer feature off, press the TIMER BUTTON until the display reads 0H.
Auxillary Outlets
Both sides of pureHeat SNUG are designed with an Auxillary Power Outlet, so you
won’t lose availability of your outlet location when SNUG is being used.
READ ALL WARNINGS & CAUTIONS (PAGE 5) BEFORE USING YOUR PUREHEAT SNUG.
ELECTRICAL DEVICES USING THESE OUTLETS MUST NOT EXCEED 5 AMPS.