Owner’s Manual
TABLE OF CONTENTS Product Contents / Unit Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About pureWash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using pureWash. . . . . . . . . . . . .
PRODUCT CONTENTS/UNIT DIAGRAM This package contains: 1 1 1 1 3 Mounting Screws 3 Dry Wall Anchors 1 Hose/Fittings pureWash Pro Quick Start Guide Power Adapter Mounting Bracket Desiccant Dryer Viewing Window Static Mixer Viewing Window Cold water In Port Household Water Out Port Uses In-line Valve To Washing Machine Port Mounting Bracket Mounting Bracket Slots Flow Rate Dial Desiccant Dryer Cartridge Door DC Power Plug 3
ABOUT PUREWASH pureWash is an environmentally friendly appliance designed to work with your residential washing machine, adding enhanced oxygen and Photo Catalytic Oxidizers to the cold water supply. Water treated by pureWash aids in cleaning laundry and killing bacteria without leaving residual detergent in the fabric. Many people find they are allergic to detergents used in washers and detergents create an environmental problem as they are dispersed into the waste water by washers.
USING YOUR PUREWASH Daily Use Using pureWash is very easy. You simply operate your washing machine according to the instructions provided by the manufacturer. The only difference is that you ONLY use the cold water setting on your washer. If hot water is used it dilutes and defeats the effectiveness of the oxidizers that the pureWash has introduced into the wash water.
WARNINGS For your safety and the proper operation of the product, please read through the warnings below before beginning installation, cleaning, or maintenance. • Disconnect power before servicing. • Do not operate the unit with the cover removed. • pureWash is designed for residential use only and is not intended for use in a commercial or industrial setting. • Water treated by pureWash is intended for laundry or cleaning purpoes ONLY. It is not approved for drinking or ingesting.
INSTALLATION REQUIREMENTS Electrical Requirements: • pureWash requires 120 Volt 60 Hz power on a 15 amp fuse or circuit breaker. Water Requirements: • Water pressure of 40 to 75 psi is required for pureWash to operate correctly and safely. • Water quality may affect the performance of your pureWash. If you have water quality concerns, such as high iron content, consult a water filtration expert.
INSTALLATION Water supply faucets should be readily accessible to permit turning them off when pureWash Pro is not being used. IMPORTANT: Turn off water supply whenever pureWash Pro is not in use. 1. The pureWash should be fastened to the wall, just above and behind your washing machine. It is recommended that one of the mounting holes on the pureWash be mounted to a wall stud, if possible. One set of mounting screws are included.
FEATURES Indicator Light The Indicator Light, viewed through the horizontal window on the front of your pureWash has two states of operation. • Blue Light - Indicates normal operation of pureWash. • Red Light - Indicates the fan or oxidizer generator is not operating properly. Please contact your dealer for service or go to pureWash.com/Support.
FREQUENTLY ASKED QUESTIONS Do tough stains have to be pretreated? We recommend that you continue to treat stains in the same manner as you did before. However, for normally soiled laundry, using pureWash will allow you to use less detergent or no detergent at all. Does pureWash work with all types of water? pureWash will work with all typical household water qualities, but the better the quality of the water the better results you will have.
TROUBLESHOOTING 1. Unit fails to turn on. Hose or power connection problem. Check the power cables for secure connection and make sure the hoses to your pureWash are connected to the correct fittings, and that your cold water faucet is turned on. 2. Red light. Oxidizing Module has failed. Contact your dealer or or visit www.pureWash.com/Support for a repair. 3. Simultaneous Flashing Blue Light and Sounding Alarm. Power Supply Has Failed. Contact your dealer or or visit www.pureWash.
TROUBLESHOOTING CONTINUED 6. Clothes are being bleached. Incorrect Flow Rate Setting. Ensure you have the correct setting chosen based upon your type of washer. If your problem continues go to pureWash.com/Support for a repair. 7. Suds in the basin after first uses. Detergent or residue is being cleaned out. Run multiple washes without clothing until the problem is resolved. If problem persists contact your dealer or go to pureWash.com/Support. 8. Discoloration occurs in the viewing tube.
MAINTENANCE Internal Diagram In case there is an issue with your pureWash in which you contact customer service, this diagram will be a resource in locating the part(s) of the unit as the customer service representative guides you through troubleshooting and servicing your unit. 1. 2. 3. Desiccant Dryer Oxidizing Module Control Module 4. 5. Venturis Static Mixer Replacement Parts The only part that will need standard replacement is the Desiccant Dryer Cartridge.
DESICCANT DRYER CARTRIDGE REPLACEMENT INSTRUCTIONS Your pureWash has a desiccant dryer incorporated in it to increase the unit’s efficacy and extend its life. This dryer is filled with a couple of drying agents that remove moisture from the air. One of the agents, made up of blue silica gel beads, is visible through the dryer window. As this agent becomes saturated with moisture these beads will turn pink.
LIMITED WARRANTY INFORMATION Your pureWash (Product) is warranted to be free from all defects in material and workmanship in normal household use for a period of 2 Years from date of purchase. The warranty is granted only to the original purchaser. The warranty is subject to the following provisions: Any damages or malfunctions caused by negligence, abuse, or use not in accordance with the Product Owner’s Manual are not covered by this warranty.
Get the Most Out of Your pureWash! In order for your pureWash to perform most effectively, water quality issues must be addressed. Installing a pre-filter is recommended to treat mild water quality issues, as unfiltered impurities in the water supply can potentially interact with the oxidizers produced by pureWash thereby hindering your pureWash’s performance. Our pre-filter is a 2-stage KDF 55 and Granular Activated Carbon (GAC) filter.
