Installation Guide
4
 SAFETY INFORMATION 
(CONT'D)
Modifications not approved by the party responsible 
for compliance could void user’s authority to operate 
the equipment.
This Class B digital apparatus complies with Canadian 
ICES-003.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions 
should always be followed to reduce the risk of fire, 
electric shock and injury to persons, including the 
following:
DANGER
•  Read all instructions before using this heater.
•  If the information in this manual is not followed 
exactly, an electric shock or fire may result causing 
property damage, personal injury or loss of life.
WARNING
•  This appliance is hot when in use. To avoid burns, 
DO NOT let bare skin touch hot surfaces. Keep 
combustible material, such as furniture, pillows, 
bedding, papers, clothes and curtains at least 3 feet 
from this appliance and keep them away from the 
sides and rear. 
•  Extreme caution is necessary when any heater 
is used by or near children or individuals with 
disabilities and whenever the fireplace is left 
operating and unattended.
•  DO NOT run cord under carpeting. DO NOT cover 
cord with throw rugs, runners, or similar coverings. 
DO NOT route cord under funiture or appliances. 
Arrange cord away from traffic areas and where it 
will not be tripped over.
•  DO NOT insert or allow foreign objects to enter any 
ventilation or exhaust opening as this may cause an 
electric shock or fire, or damage the appliance.
•  This appliance has hot and arcing or sparking parts 
inside. DO NOT use it in areas where gasoline, 
paint or flammable vapors or liquids are used or 
stored. This fireplace should not be used as a 
drying rack for clothing. Christmas stockings or 
decorations should not be hung in the area of it. 
•  Use this appliance only as described in the manual. 
Any other use is NOT recommended by the 
manufacturer and may cause fire, electric shock or 
injury to persons. 
CAUTION
•  If possible, ALWAYS unplug this appliance when 
not in use. 
•  DO NOT operate any heater with a damaged 
cord or plug or after the heater malfunctions. DO 
NOT operate any heater if it has been dropped 
or damaged in any manner. Disconnect power 
at service panel and have heater inspected by a 
reputable electrician before reusing. 
•  Any repairs to this fireplace should be carried out 
by a qualified service person. 
•  Under no circumstances should this fireplace be 
modified. Parts having to be removed for servicing 
must be replaced prior to operating this fireplace 
again. 
•  DO NOT use outdoors. 
•  This heater is not intended for use in bathrooms, 
laundry areas and similar indoor locations. NEVER 
place heater where it may fall into a bathtub or 
other water container. 
•  To disconnect this appliance, turn controls to the off 
position, then remove plug from outlet. 
•  ONLY connect to properly grounded outlets. 
•  This appliance, when installed, must be electrically 
grounded in accordance with local codes, with the 
current CSA C22.1 Canadian Electrical Code or 
follow U.S.A. Installations, follow local codes and 
the National Electrical Code, ANSI/NFPA N0.70.










