Installation Guide

6
OPERATING INSTRUCTIONS
Control Panel Remote Control
To use the remote control,
first remove the plastic tab
by gently pullling it out of
remote control (H).
Power Button
• Pressing the power button will turn ON or OFF the unit.
• When the unit is in ON mode, the power icon indicator light will be shown green and turn ON the
heating level and flame brightness effect with the last settings.
• When the unit is in OFF mode, the power icon indicator light will be shown red.
Note: The unit has a memory function with last settings for heating level and flame brightness effect,
unless the main power to the unit has been interrupted.
Mode Button
• Press the mode button to cycle through the different functions. Each time the mode button is
pressed, the mode will enter the next function - Temperature, Timer or Flame Brightness.
UP Arrow Button
• Use up arrow button to increase the setting of the selected function.
Down Arrow Button
• Use down arrow button to decrease the setting of the selected function.