Installation Guide

CARE AND MAINTENANCE

BATTERY

• Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool

whenever you are cleaning the heater .

• Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or

household cleaners as these products will damage the metal trim.

• The motors used on the fan and the flame generator assembly are pre-lubricated for extended

bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/

heater and air intake/output vents is recommended.

• When the heater is not in use, the heater should be stored in a dry location, away from possible

damage. The power cord should be stored properly to avoid contact with hot or sharp objects.

• Any other servicing should be performed by an authorized service representative.

Replacing the Remote Control Battery

Disposal of Used Battery

When the remote control (B) stops operating or its

range seems reduced, it is time to replace the

battery. Note: The battery should be removed if the

product is to be left unused for a long time.

A battery may contain hazardous substances that could be endangering to environment and

human health.

• This symbol marked on the battery and/or packaging indicates that used battery

shall not be treated as municipal waste. Instead it shall be left at the appropriate

collection point for recycling.

• By ensuring the used battery is disposed of correctly, you will help prevent

potential negative consequences for the environment and human health. The

recycling of materials will help to conserve natural resources.

• Do not dispose of battery in fire. battery may explode or leak.

• Harmful if swallowed.

For more information about collection and recycling of used battery, please contact your local

municipality, your waste disposal service or the point of sale where you purchased this point.

1. The battery compartment is located on the back end

of the remote control (B).

2. Press the small tab inward as you slide the battery

door open and remove the old battery.

3. Insert a new CR2025 lithium battery (not included),

checking that the + and - sides of the battery match

the inside of the battery compartment.

4. Re-insert the battery door.

Caution: Non-rechargeable battery is not to be

recharged. Exhausted battery is to

be removed from the product.