User's Manual

4
current reading and the base value: The exact target area on your meter depends on whether it is an electric or
gas meter, as well as the specific type.
2. Attach Template to Meter
Since placement of the Pulse Reader cable sensor on the meter is critical, your kit includes self-adhesive
templates to help you align the sensor. Visually align the marking on the template to the target placement on
your meter. When you are sure of the placement and where to align the marking on each template, remove the
adhesive backing from the template and stick it to the meter. Be careful to ensure that the template’s marking is
placed exactly over the target sensor placement on the meter.
After sticking the template to your meter, remove the middle portion of the template that contains the alignment
marking. This area is perforated to help you remove it. You should be left with two sides of the template still stuck
to your meter. This is the area where you will align the Pulse Reader sensor.