Electric Fireplace with integrated wine cooler and storage Foyer électrique avec cabinet à boisson et remisage Model / Modèle / Modelo: GEF28WCDO Assembly Instructions Instructions d'assemblée Instrucciones de asamblea
TIPS FOR ASSEMBLY OF YOUR NEW MANTEL • Before you begin assembly, ensure you have the complete instructions and locate the red hardware bag which contains all the hardware you need to assemble this mantel. Take out all the parts and compare them to the photograph and assembly instructions. Be sure you have all the parts and can identify them. • A helping hand is always good: assemble your mantel with an adult assistant if possible. Some pieces are heavy and will need to be held by a helper.
GET READY TO START Before assembly, use scissors to unwrap the parts from the packaging. DO NOT use a box cutter or exacto-knife as you may cut into the mantel pieces inside the box and damage the finish. Check for the hardware bag which is red and located inside the packaging taped to the top box. Be sure you DO NOT discard any pieces. Step 1 Locate the hearth and place it on the floor.
Step 4 Locate the left side top panel (this part has the 5 holes in it for the wine glass storage rack) and the wine glass storage rack. Position the left side top panel face up and attach the rack by inserting and tightening the 5 screws….....remember to use the smaller screws to attach the storage rack. Once you have installed the silver colored wine glass storage rack you can take the top back to the mantel and position the top panel on the sides and back.
Step 6 Locate the right inside and outside wall panels for the right wine cooler storage compartment. Place them around the bottom panel (already in place) on the hearth. Get your helper to hold these pieces in place while you insert and tighten the 6 bottom screws. Position the top panel in place. Get your helper to apply pressure to the side to eliminate any gaps while you insert and tighten the top 6 screws.
Step 9 Take the wine cooler out of its packaging and position it in the right side storage compartment. Ensure the plug is at the back of your mantel, ready to be plugged in before you position your mantel in place up against the wall. Ensure the feet of the wine cooler are positioned in the holes for the feet on the bottom panel of the storage compartment.
Step 11 Get your helper and locate the top of your mantel. This top is very heavy. It will take 2 people to lift and position it in place. Ensure the top goes over the positioning guide located on the header. The top must go over this guide to be positioned correctly. Once the top is in place insert and tighten the 9 screws. Step 12 You are now ready to position your mantel against the wall. This step requires 2 people to move the unit.
WARRANTY DO NOT RETURN THIS PRODUCT TO THE STORE: Greenway Home Products is pleased to offer in home warranty repairs. Please contact Customer Service at: In Canada: 1-866-253-0447 In the USA: 1-866-282-0533 Limited Warranty Definitions Greenway Home Products: Mantel: Purchaser: Distributor: Warranty Card Manufacturer. Mantel manufactured by Greenway Home Products. Purchaser of the Mantel Facility authorized to sell Greenway Home Products.
Due to the properties of natural wood, Greenway Home Products makes no warranty against mineraling of wood components. Greenway Limited Warranty is void unless the following conditions are adhered to: 1. Warranty registration must be completed and returned to Greenway Home Products. 2. All warranty repairs must be preauthorized by Greenway repair facility. 3. Greenway reserves the right to inspect defective parts that have been replaced under warranty. Dealer is expected to hold defective parts for 60 days.
