Manual

11
ASSEMBLY INSTRUCTIONS
ASSEMBLING THE WHEELS (See Figure 2)
The wheels are used to control the depth of operation, and adjust the height of the cultivator.
1. Remove the battery from the unit.
2. Place cultivator in a stable position as shown in Fig. 2
3. Insert the wheel assembly (2) into the support rod (3). (Fig. 2)
4. Align wheel assembly hole to desired position. Slide bolt (5) through hole and attach hitch
pin (6) to bolt.
5. The highest tilling position is Position A and lowest tilling position is Position B.
6. Wheels can be removed for greater tilling depth.
POSITION A - HIGHEST
POSITION B - LOWEST
(2) WHEEL ASSEMBLY
(3) SUPPORT ROD
STEP 1
STEP 2
(5) BOLT
(6)HINCH
PIN
Fig.2