Manual

13
ADJUSTING WHEEL POSITION (See Figure 6)
The wheel position of the unit is adjustable.
The wheels are used to control the depth of operation. To adjust the height of the cultivator
：
1. Remove the battery from the unit.
2. Insert the wheel assembly (1) into the support rod (2).
3. Align wheel assembly hole to desired position. Slide bolt (3) through hole and attach fastening
knob (4) to bolt (3).
4. Tighten the fastening knob (4).
NOTE: The wheels are used to control the depth of operation. To adjust the height of the cultivator, move the bolt
to a higher or lower hole position. The wheels can be removed for greater tilling depth.
Fig.6
OPERATING INSTRUCTIONS
1
4
3
2