Operating Guide

1
2
3
4
6
3
5
5. Tighten the wing nut (1).
10 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
tranportation and storage.
10.1 MOVE THE MACHINE
When you move the machine, you must:
• Stop the machine.
• Remove the battery pack.
10.2 STORE THE MACHINE
• Remove the battery pack from the machine.
• Make sure that children cannot come near the
machine.
• Keep the machine away from corrosive agents such
as garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine
for any damage.
11 TROUBLESHOOTING
Problem Possible Cause Solution
The ma-
chine does
not start
when you
push the
trigger.
No electrical
contact between
the machine and
the battery pack.
1. Remove battery
pack.
2. Check contact and
install the battery pack
again.
The battery pack
is depleted.
Charge the battery
pack.
The lock-out but-
ton and trigger
are not pushed
at the same
time.
1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to
start the machine.
Edger
stops dur-
ing use.
Depth is set too
low.
Adjust the depth as
shown in the instrus-
tion manual.
Walking too fast. Do not force the edger
through the grass.
12 TECHNICAL DATA
Type Cordless, battery powered
Motor 60V Brushless
No load speed 7000 (±10%) RPM
Blade length 8 in. (203 mm)
Weight (without battery
pack)
10.37 lbs (4.7 kg)
The recommended ambient temperature range:
Item Temperature
Edger storage tempera-
ture range
-4°F (-20°C) - 158°F
(70°C)
Edger operation tempera-
ture range
6.8°F (-14°C) - 104°F
(40°C)
Battery charging tempera-
ture range
39°F (4°C) - 104°F (40°C)
Charger operation temper-
ature range
39°F (4°C) - 113°F (45°C)
Battery storage tempera-
ture range
1 year: 32°F (0°C) - 73°F
(23°C)
3 month: 32°F (0°C) -
113°F (45°C)
1 month: 32°F (0°C) -
140°F (60°C)
8
English
EN