Operating Guide

3. Set the auxiliary handle in the most comfortable in

use position.

4. Tighten the screws.

7.3 INSTALL THE BATTERY PACK

WARNING

• If the battery pack or charger is damaged, replace

the battery pack or the charger.

• Stop the machine and wait until the motor stops

before you install or remove the battery pack.

• Read and understand the instructions in the

battery and charger manual.

1. Align the lift ribs on the battery pack with the

grooves in the battery compartment.

2. Push the battery pack into the battery compartment

until the battery pack locks into place.

3. When you hear a click, the battery pack is installed.

7.4 REMOVE THE BATTERY PACK

1. Push and hold the battery release button (1).

2. Remove the battery pack from the machine.

8 OPERATION

IMPORTANT

Before you operate the machine, read and understand

the safety regulations and the operation instructions.

WARNING

Be careful when you operate the machine.

8.1 CONTROLS

8.2 START THE MACHINE

1. Pull back on the lock-out button (1) and pull the

trigger (2). Once the machine is running you can

release the lock-out button.

8.3 STOP THE MACHINE

1. Release the trigger to stop the machine.

8.4 ADJUST THE DEPTH OF CUT

1. Remove the battery pack.

2. Loosen the depth adjustment knob to increase or

decrease the depth.

Depth Adjustment Knob

3. Adjust the depth so that the blade barely touches

the ground when the machine is held in a normal

operating posture.

4. Tighten the depth adjustment knob.

English