Installation Guide

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Motor fails to start

when switch trigger is

depressed.

Battery is not secure. To secure the battery pack, make sure

the latches on the top of the battery

pack snap into place.

Battery is not charged. Charge the battery pack according

to the instructions included with your

model.

Motor runs,but cutting

blades do not move.

Hedger damaged. Do not use

hedge trimmer.

Call for technical service.

Hedge trimmer

smokes during

operation.

Hedger damaged. Do not use

hedge trimmer.

Call for technical service.

Motor hums, blades

do not move.

Debris or other may be

jamming the blades.

Remove battery, clear debris blockage

from blades.