Use and Care Guide

2.Wait 10 seconds to be
sure the impeller blades
have stopped rotating.
3.Always use a clean-out
tool, not your hands.
• If the snow thrower strikes a
foreign object follow these
steps:
1.Stop snow thrower.
Release the switch.
2.Remove the battery pack.
3.Inspect for damage.
4.Repair any damage
before restarting and
operating the snow
thrower.
2.4 MAINTENANCE
• Check shear bolts; engine-
mounted bolt, etc., at
frequent intervals for proper
tightness to be sure the
power tool is in safe
working condition.
• Always refer to owner’s
guide instructions for
important details if the
power tool is to be stored
for an extended period.
• Store Idle Snow Movers
Indoors – When not in use,
snow movers should be
stored indoors in dry,
locked-up place – out of
reach of children.
• Store Idle Snow Movers
Indoors – When not in use,
snow movers should be
stored indoors in dry,
locked-up place – out of
reach of children.
• Run the power tool a few
minutes after throwing snow
to prevent freeze-up of the
collector/impeller.
• Do not use a battery pack
or appliance that is
damaged or
modified.Damaged or
modified batteries may
exhibit unpredictable
behavior resulting in fire，
explosion or risk of injury.
• Do not expose a battery
pack or appliance to fire or
excessive
emperature.Exposure to fire
or temperature
above130°Cmay cause
explosion.The temperature
of 130°C can be replaced
by the temperature of
265°F.
8
English
EN