PS80L01 PS80L211 EN POLESAW OPERATOR MANUAL FR ÉLAGUEUSE SUR PERCHE MANUEL DE L'UTILISATEUR ES SIERRA TELESCÓPICA MANUAL DEL OPERADOR PSB403 www.greenworkstools.
English 1 1.1 1.2 1.3 2 2.1 2.2 3 4 5 6 7 7.6 7.7 7.8 7.9 Description......................................... 2 Purpose.............................................................. 2 Overview........................................................... 2 Packing list........................................................ 2 8 General power tool safety warnings............................................. 2 8.1 8.2 8.3 8.4 8.5 General safety rules...........................................
English EN 1 DESCRIPTION 1.1 PURPOSE 2 GENERAL POWER TOOL SAFETY WARNINGS WARNING This product is a cutting implement mounted on a pole to enable the operator to cut the branches of standing trees. It is not intended for use as a regular chainsaw. Do not operate near electrical power lines.
English • • • • • • • • • • • • • Store Idle Appliances Indoors – When not in use, appliances should be stored indoors in dry, and high or locked-up place – out of reach of children. Maintain Appliance With Care – Keep cutting edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.
English EN 3 SYMBOLS ON THE PRODUCT SYMBOL Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. Symbol Explanation SIGNAL MEANING WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
English EN WARNING WARNING • If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Discard it and replace with a new battery pack. DO NOT TRY TO REPAIR IT! To prevent injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment: • • • • • • • • 6 • • Cover the terminals of the battery with heavy-duty adhesive tape. DO NOT try to remove or destroy any of the battery pack components. DO NOT try to open the battery pack.
English EN 7.3 ASSEMBLE THE GUIDE BAR AND THE CHAIN 1. Loosen the chain cover by turning the chain cover knob (8) counterclockwise. 2. Remove the chain cover (14). 11. Tighten the bar nut when the chain is correctly tensioned. NOTE 14 If you start the chain saw with a new chain, have a test for 2-3 minutes. A new chain gets longer after the first use, examine the tension and tighten the chain if necessary. 8 7.4 FIT THE POLE SAW 3. Put the chain drive links (17) into the bar groove (15). 4.
English 7.6 USE THE SHOULDER STRAP EN 2. Push the battery pack into the battery compartment until the battery pack locks into place. 3. When you hear a click, the battery pack is installed. 7.9 REMOVE THE BATTERY PACK 1. Push and hold the battery release button. 2. Remove the battery pack from the machine. 8 60°MAXIMUM OPERATION NOTE Remove the battery pack and keep hands clear of the lock out button when you move the machine. 1. Attach the carabiner to the carrying ring on the pole. 2.
English EN 8.4 DELIMBING A TREE CAUTION Do not use strong solvents or detergents on the plastic housing or components. B WARNING Remove the battery pack from the machine before maintenance. A 9.1 ADJUST THE CHAIN TENSION CAUTION Wear protective gloves if you touch the chain, bar or areas around the chain. 1. Loosen the chain cover (14) by turning the chain cover knob (8) counterclockwise. WARNING Make sure that there is nothing or nobody in the area where the branches fall.
English • EN There is too much space between the drive links and the rivets. The cut speed is slow. Sharpening the chain many times but it does not increase the cutting speed. The chain is worn. • • 9.3 GUIDE BAR MAINTENANCE 2. Sharpen the cutters corner with a 5/32 in. (4 mm) diameter round file . 3. Sharpen the top plate, side plate and depth gauge with a flat file. NOTE Make sure that the bar is turned over periodically to keep symmetrical wear on the bar. 1.
English EN • • Clean all unwanted material from the machine. Make sure that the storage area is • • 11 Not available to children. Away from agents which can cause corrosion, such as garden chemicals and de-icing salts. TROUBLESHOOTING Problem Possible cause The machine does The poles are not not start. assembled correctly. Possible cause The motor runs, but the chain does not cut correctly, or the motor stops after around 3 seconds. 1. Release the When you use the trigger. machine under 2.
English LIMITED WARRANTY S N C ST IN LASS BE TÉGOR IE • CA M SA EJ R O CLASE EN MEILLEU RD A 13 GARANTIE OUTIL & BATTERIE • GARANTÍA PARA HERRAMIENTAS Y BATERÍAS Greenworks hereby warranties this product, to the original purchaser with proof of purchase, for a period of four (4) years against defects in materials, parts or workmanship. Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer.
English EN 14 EXPLODED VIEW 2 1 3 5 4 6 8 7 9 10 No. Part No. Qty Description No. Part No.
