Manual

ASSEMBLY INSTRUCTION
14
WARNING
BATTERY
TO INSTALL THE BATTERY:
1. Align the battery with the battery opening.
2. Insert the battery into the battery opening until the battery release button locks into
place.
3. Push down on the battery until it locks into place. You should hear a “click” once it is
installed.
TO REMOVE THE BATTERY:
1. Press the battery release button on the chain saw. This will cause the battery to raise
out of the tool slightly.
2. Grasp the chain saw rmly and pull the battery out of the handle.
Follow these instructions in order to avoid injury and to reduce the risk of electric shock
or re:
• Replace the battery or the charger immediately if the battery case or charger acord is
damaged.
• Read, understand, and follow the instructions contained in the charger manual.
The battery may not be charged when it is purchased. Beforeusing the chain saw
for the rst time, place the battery in the battery charger and charge it fully. Be sure
to read all safety precautions and follow the instructions in the battery and charger
manuals. When storing the chain saw for a prolonged period of time, remove the
battery. When the chain saw is going to be used again, charge the battery for at least
a full charging period. The battery has no memory effect.
IMPORTANT