Operating Guide

BATTERY PACK (See Figure 7)

I M P O R T A N T

The battery pack is not charged when it is purchased. Before using the chain saw for the rst

time, place the battery pack in the battery charger and charge it fully. Be sure to read all safety

precautions, and follow the instructions in the section entitled Charging Procedure. With regular

use, the battery will require shorter charging times. When storing the chain saw for a prolonged

period of time, remove the battery. When the chain saw is going to be used again, charge the

battery pack for at least a full charging period. This product has no memory effect.

REMOVING THE BATTERY PACK

• Press the latch button (1) on the battery pack down and hold.

• Grasp the chain saw (2) rmly, and pull the battery pack out of the handle.

Note: The battery pack ts into the handle snugly in order to prevent accidental dislodging. It may require a

strong pull to remove it.

OPERATING YOUR CHAIN SAW