Operating Guide

32
SHARPENING THE CUTTERS
(See Figure 37-40)
obtained only when all cutters are uniform.
C A U T I O N
Make sure the battery is removed from the chain saw before you work on the saw.
W A R N I N G
The saw chain is very sharp. Always wear protective gloves when performing maintenance to
the chain to prevent serious personal injury.
• Tension the chain prior to sharpening. Refer to Adjusting The Chain Tension.
•
bar.
•
•
•
•
•
C A U T I O N
A dull or improperly sharpened chain can cause excessive motor speed during cutting, which
may result in severe motor damage.
W A R N I N G
Improper chain sharpening increases the potential of kickback.
W A R N I N G
Failure to replace or repair a damaged chain can cause serious injury.
MAINTENANCE
0