Operating Guide

ASSEMBLY INSTRUCTION
BLOWER TUBE ASSEMBLY
WARNING
To prevent accidental start-up that could cause serious personal injury, always remove the
battery pack from the tool when assembling parts.
1. Align either of the grooves in the tube with the tabs on the blower housing. Push the tube into
the blower housing until the tab engages the grooves.
(See Figure 3.)
LockUnlock
Lock Position
11
Fig. 4
2. Turn the tube clockwise until both of the tabs slide into the lock positions.
(See Figure 4.)
Fig. 3
Tube
Groove
Tab
Clockwise