Operating Guide

15
WARNING
In order to avoid personal injury and the risk of re and electric shock, remove the battery pack
before adjusting, inspecting, or cleaning the blower.
CLEANING
Remove the battery pack.
1. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep
the air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the
air vents in water.
2. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners
may cause damage, and may cause a shock hazard.
BATTERY PACK
• Store the battery pack fully charged.
• Once the charging light turns green, remove the battery from the charger and disconnect the
charger from the outlet.
• Do not store the battery pack on the tool.
• After charging, the battery pack may be stored in the charger, as long as the charger is not
plugged in.
MAINTENANCE
CHECKING BATTERY CAPACITY
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the
batteries capacity level. See chart below:
BCI BUTTON
LIGH
T
METRE
BATTERY METRE
Lights Capacity
The battery is at 80-100% capacity
The battery is at 50-80% capacity
The battery is at 20-50% capacity
3 Green Lights
2 Green Lights
1 Green Light
Lights go out
The battery is under 10% capacity and
requires charging immediately