2 AMP ELECTRIC BLOWER/MULCHER WITH METAL IMPELLER 24072 Owner’s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool.
CONTENTS Contents............................................................................................................................... 2 Specifications....................................................................................................................... 2 Important Safety Instructions.............................................................................................3 - 4 Specific Safety Rules................................................................................
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. READ THESE INSTRUCTIONS BEFORE USING THE BLOWER • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
IMPORTANT SAFETY INSTRUCTIONS • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. • Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance. • Turn off all controls before unplugging. • Avoid accidental starting. Be sure the power switch is not on before plugging in. Turn off power switch before unplugging. • Do not use tool if switch does not turn it on or off.
SPECIFIC SAFETY RULES FOR BLOWER • Extension Cord – To reduce the risk of disconnection of appliance cord from the extension cord during operating, it is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown in figure 1, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together. Fig.
SPECIFIC SAFETY RULES FOR BLOWER • Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also. WHILE OPERATING UNIT AS A BLOWER • Never point the blower in the direction of people or pets or in the direction of windows. Use extra caution when blowing debris near solid objects such as trees, automobiles and walls. OTHER SAFETY WARNINGS • Be sure to secure the unit while transporting.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-pretation of these symbols will allow you to operate the product better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
ELECTRICAL WA R N I N G THIS DETHATCHER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS. GUIDELINES FOR USING EXTENSION CORDS USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one of heavy enough gauge to carry the current your product will draw. An undersized cord will cause overheating. The table below shows the correct size to use depending on cord length and nameplate ampere rating.
ELECTRICAL WA R N I N G CHECK EXTENSION CORDS BEFORE EACH USE. IF DAMAGED REPLACE IMMEDIATELY. NEVER USE TOOL WITH A DAMAGED CORD SINCE TOUCHING THE DAMAGED AREA COULD CAUSE ELECTRICAL SHOCK RESULTING IN SERIOUS INJURY. ELECTRICAL CONNECTION This tool is powered by a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC).
KNOW YOUR BLOWER The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. (See Fig. 2) BLOWER TUBE The blower tube can be easily installed on the blower without any additional tools. CORD RETAINER A convenient cord retainer helps keep the extension cord connection secure during blower operation.
ASSEMBLY UNPACKING • This product requires assembly. WA R N I N G This new product has been shipped in a partially assembled condition as described below. Carefully check the packing list below to ensure all items are included in the package; the packing list describes all loose items that are not assembled to the product as shipped. Do not operate the product if any packing list items are already assembled to your product when you unpack it. Call the customer service number below for assistance.
ASSEMBLY ASSEMBLE AS A MULCHER (See Fig. 3) 1. Slide the front and rear mulcher tubes together until the lock button engages. (See fig 3) 2. Pull the lock button forward to disengage the gate. Hold the gate open. (See fig 3.1) 3. Insert the “wedged” end clip of the mulcher tube into the rear clip. (See fig 3.2). Push the “hooked” end clip of the mulcher tube into the front clip. (See fig 3.3). Press the lock button back to engage the mulcher tube. (See fig 3.4) 4.
ASSEMBLY ASSEMBLE AS A BLOWER ((See Fig. 4)) 1. Slide blower tube forward until the notched areas on the blower housing click into the slots on the tube. 2. Insert the concentrator nozzle onto the regular nozzle to lock. (Concentrator nozzle is used to increase air flow in tight areas: flower beds. under decks, etc.). Fig. 4 SLOT BLOWER TUBE NOTCHED AREA CONCENTRATOR NOZZLE AIR OUTLET INSTALLING BAG WITH SHOULDER HARNESS (See Fig.
OPERATION CONNECTING THE POWER CORD Fig. 6 (See Fig.6) 1. Secure the extension cord to the motor housing using the notch at rear of blower. This prevents accidental removal of the electrical cord. 2. Plug the female end of the electrical cord into the receptacle at the back of the unit. STARTING/STOPPING THE BLOWER/ Fig. 7 MULCHER (See Fig.7) 1. Roll the speed dial forward (A) until a positive click is heard and the blower turns ON. B A 2.
OPERATION OPERATING TIPS (See Fig.8) • The bag is installed and zipped closed (when used as a mulcher). • Be sure the bag is zipped closed before operating the unit. • Assure the unit is not directed at anybody or any loose debris before starting the unit. • Verify that the unit is in good working condition. Make sure the tubes and guards are in place and secure. • Always hold the unit with both hands when operating. • Keep a firm grip on both the front and rear handle or grips.
OPERATION AIR VENTS Never cover air vents. Keep them free from obstructions and debris. They must always remain clear for proper motor cooling. WA R N I N G To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc., that could get drawn into the air vents. To make sure long hair does not get drawn into the air vents, tie back long hair. OPERATING AS A BLOWER Hold the blower firmly.
MAINTENANCE SERVICING DOUBLE-INSULATED UNITS This unit is double insulated. In a double-insulated unit, two systems of insulation are provided instead of grounding. There is no grounding provided and no means of grounding should be added to this unit. Extreme care and knowledge of the system is required when servicing a double-insulated unit. Service should be performed by qualified service personnel only. Replacement parts for a double-insulated unit must be identical to the parts they replace.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Unit will not blow or mulcher. 1. Bag full 1. Empty the bag. 2. Blocked tube 2. Clear the blockage. 3. Blocked impeller 3. Clear the blockage 4. Dirty bag 4. Clean the bag. 5. Torn bag 5. Replace the bag. 6. Bag unzipped 6. Zip up the bag. 7. Unit unplugged 7. Plug into an outlet or an extension cord. 1. Unit is unplugged. 1. Check cord to make sure it is plugged into an electrical outlet. 2. Power/speed switch is in the OFF position. 2.
LIMITED FOUR-YEAR WARRANTY GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase, for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer.
EXPLODED VIEW 21
PARTS LIST ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PART NO. 34104142-1 31101148 36201148 31109148 3220313 34901148 3410801 3420102 3650339 3640127 3410679-3 34201148 3320128 33901142 33203142 3410127-1 34105142-1 33401142 34201142 31104148 34106142-1 34107142-1 31103148 34115142-1 DESCRIPTION blower tube 12A motor assy. Blower/Mulcher variable switch housing assy.
NOTES 23
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.