40V BRUSHLESS BLOWER / VAC 24322 Some Greenworks Lithium-Ion products are sold with or without battery and charger. Owner’s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.GreenWorksTools.com Read all safety rules and instructions carefully before operating this tool.
CONTENTS general safety rules Contents............................................................................................................................... 2 Product specifications........................................................................................................... 2 General safety rules..........................................................................................................3-5 WA R N I N G Read and understand all instructions before using this product.
general safety rules general safety rules • Keep all parts of your body away from any moving parts and all hot surfaces of the unit. • Do not point the blower nozzle in the direction of people or pets. • Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow. • Never run the unit without the proper equipment attached. Always ensure the sweeper tubes are installed. • Check the work area before each use.
SymbolS SymbolS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. The following signal words and meanings are intended to explain the levels of risk associated with this product.
know your BLOWER Assembly instruction The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. (See Fig. 1) UNPACKING • This product requires assembly. HIGH VELOCITY CONCENTRATOR NOZZLE The high velocity nozzle is great for wet sticky leaves.
Assembly instruction Assembly instruction Assemble as a mulcher (See Fig. 2) Assemble as a blower ((See Fig. 3)) 1. Slide the front and rear mulcher tubes together until the lock button engages. (See fig 2) 1. Slide blower tube forward until the notched areas on the blower housing click into the slots on the tube. 2. Insert the concentrator nozzle into the regular nozzle to lock. (Concentrator nozzle is used toincrease air flow in tight areas: flower beds. under decks, etc.). 2.
operation operation BATTERY STARTING/STOPPING THE BLOWER/MULCHER (See Fig.6) IMPORTANT! The battery pack is not charged when it is purchased. Before using the blower for the first time, place the battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the instructions in the Battery Charger section. To install (See Figure 5.) 1. Align the tongue (3) of the battery pack with the cavity (4) in the blower housing. 2. Grasp the blower (2) firmly. 3.
operation OPERATIon STATUS LED SOLVE METHOD hall fault protection Green light off red light on; flash 7 times; each time keep 1hz interval: 3s; keep 60s buzzer alarm Off the trigger and restart it low-voltage protection Green light off red light on; flash 5 times; each time keep 1hz interval: 3s; keep 60s buzzer alarm Off the trigger and restart it or Charging the battery Over load protection Green light off red light on; flash 4 times; each time keep 1hz interval: 3s; keep 60s buzzer alarm Off
operation MAINTENANCE CLEANING THE UNIT AIR VENTS Never cover air vents. Keep them free from obstructions and debris. They must always remain clear for proper motor cooling. WA R N I N G To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc., that could get drawn into the air vents. To make sure long hair does not get drawn into the air vents, tie back long hair. OPERATING AS A BLOWER Hold the blower firmly.
MAINTENANCE ENVIRONMENTALLY SAFE BATTERY DISPOSAL CLEANING THE BAG 1. Empty the bag after each use to avoid deterioration and obstructing air flow, which will reduce the performance of the mulcher. 2. Wearing eye protection and a dust mask, clean the bag as needed. Turn the bag inside out after initial emptying and vigorously shake out dust and debris. 3. Wash the bag once a year, or more often if needed: a. Remove the bag. b. Turn bag inside out. c. Hang it up. d. Hose it down thoroughly. e.
troubleshooting LIMITED four-YEAR WARRANTY PROBLEM POSSIBLE CAUSE SOLUTION Unit will not blow or mulcher. 1. Bag full 1. Empty the bag. 2. Blocked tube 2. Clear the blockage. 3. Blocked impeller 3. Clear the blockage 4. Dirty bag 4. Clean the bag. 5. Torn bag 5. Replace the bag. 6. Bag unzipped 6. Zip up the bag. 7. Battery is not secure. 7. To secure the battery pack, make sure the latches on the top of the battery pack snap into place. 8. Battery is not charged. 8.
EXPLODED VIEW parts list Item No. 1 2 3 4 5 6 7 8 9 10 11 22 Part No. 31108810 33202810 34103204 33203142 34119144 34118144-1 34105810 34103810 31101810 34106142A 34107142 Description blower/Vac shaft sleeve Vac mulching impelle Vac cutter blade pad turn cap blower tube (brushless) concentrator nozzle bag assy.
NOTES TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.