Operating Guide

12
ATTACH THE REAR BAG (See Figure 7-10)
Take out all components in the packing (Fig. 7).
Push the left and right washer on rear bag bracket to inside direction to make the rear bag
open. (Fig. 8).
Place the hooks (1) on the rear bag onto the roller shaft (2). (Fig. 9).
Place locking strap (3) from the rear bag to the center bar of the middle handle.
Adjust strap for proper height so the bag does not rub the ground while mowing or transporting.
(Fig. 10).
ASSEMBLY INSTRUCTIONS
Fig. 7 Fig. 8
Fig. 9 Fig. 10
1
2
3