Operating Guide

ASSEMBLY INSTRUCTIONS

TO INSTALL BATTERY PACK (See Figure 5)

• Open the battery compartment cover (1).

• Slide the battery (2) down to lock it into position. The battery is fully inserted into the snow

thrower when you hear an audible "click".

• Close the battery compartment cover (1).

Fig. 5

TO REMOVE BATTERY PACK (See Figure 5)

• Ensure that the impeller has come to a complete stop.

• Release your grip on the bail to stop the snow thrower.

• Press the battery release button (3) on the snow thrower. This will cause the battery to raise

out of the tool slightly.

• Remove battery pack from the snow thrower.