Operating Guide

4
5
6
7
8
9
10
11
MAINTENANCE
22
REPLACING THE IMPELLER (See Figures 11-13)
• Remove the 5 screws (1) that secure the right side cover (2) to the frame of the snow thrower.
• Remove the nut (3).
• Remove the 5 screws (4) that secure the left side cover (5) to the frame of the snow thrower.
• Remove the belt (6).
• Using a socket, remove the the large pulley (7).
• Remove the 5 screws (8) that secure the left side plate (9) and remove the left side plate.
• Pull the axle (10) and remove the old impeller (11).
• Install the new impeller.
• Reinstall the left side plate, large pulley, belt and left side cover.
• Reinstall the nut and right side cover.
Fig. 12
Fig. 13
Fig. 11
1
2
3