Replacement Part List

PROBLEM POSSIBLE CAUSE SOLUTION

Then handle is not The carriage bolts are not Adjust the height of the handle, and verify

in position. properly seated. that the carriage bolts are properly seated.

Tighten the knobs.

The Snow Shovel The Snow Shovel is Verify that the Snow Shovel is plugged

does not start. unplugged. into an electrical outlet.

The lock-out button or trigger Press and hold the lock-out button, and

switch were not used properly. then lift and hold the trigger switch (see

the section entitled Starting the Snow

Shovel).

The overload protection switch See the section entitled Overload

has popped out. Protection Switch.

The motor is on, but The belt is damaged. Replace the belt (see the section entitled

the rotor does not Inspecting/Replacing the Drive Belt).

turn.

The Snow Shovel The scraper is worn. Replace the scraper (see the section

leaves a thin layer of entitled Replacing the Scraper).

snow behind.

TROUBLESHOOTING