Use and Care Guide

ASSEMBLING THE WHEELS

See Figure 3.

• Insert an axle through a wheel, the frame of the unit, and then a washer.

• Insert a cotter pin through the hole in the axle to secure. Repeat for second wheel.

ASSEMBLY

Fig. 3

ASSEMBLING THE FRONT PANEL AND GUN HOLDER

See Figure 4.

• Line up the screw sleeves with the holes in the upper handle and push through.

• Insert the screw and turn clockwise with a phillips head screw driver (not included) until the

screw is tight.

ASSEMBLING THE HOSE HOOK

See Figure 4.

• Line up the hose hook upper end with the holes on the back of the front panel

• Insert the hose hook end into the hole and push through.

• Press the hose hook lower end into the clip on the back of the front panel.

Cotter pin

Axle

Washer

Fig. 4