Use and Care Manual

Loc
kUnlock
WARNING
ASSEMBLY INSTRUCTION
BLOWER TUBE ASSEMBLY
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
1. Align either of the grooves in the tube with the tabs on the blower housing. Push the tube into
the blower housing until the tab engages the grooves (See Figure 3).
11
Fig. 4
2. Turn the tube in the direction of the arrow until both of the tabs slide into the lock positions
(See Figure 4).
Fig. 3
Lock Position
Tube Groove
Tab