Operating Guide

EN - 12

ASSEMBLY

ASSEMBLING THE PRESSURE WASHER HANDLE (See Figure 3.)

■ Slide the handle into the slots until it locks into place.

■ Insert the screws into the holes and tighten the screws with a phillips head screwdriver (not included).

ASSEMBLING THE PRESSURE WASHER GUN

■ Insert the male end (A) of the wand into the female bayonet outlet (B) firmly.

(See Figure 4-1.)

■ While pushing in the wand firmly, turn clockwise until tabs lock into place to ensure a leak-free

connection. (See Figure 4-2.)

Fig. 3

Fig. 4-1

Fig. 4-2

Screws