Operating Guide

OPERATION

OPERATING THE PRESSURE WASHER (See Figure 11)

Use only detergents designed for pressure washers. Many detergents may require mixing prior to

use. Prepare cleaning solution as instructed on the solution bottle.

• Turn the garden hose on then squeeze the high pressure trigger to relieve air pressure. Once a

steady stream of water appears, release the trigger.

• After ensuring the switch is in the OFF position, connect the pressure washer to the power

supply.

• Set the switch to the ON(I) position to start the motor.

• Turn the garden hose on then squeeze the high pressure trigger.

Fig. 11

MOVING THE PRESSURE WASHER

To move the pressure washer:

• Turn the pressure washer off. Point the spray wand in a safe direction and pull trigger to release

water pressure.

• Move the pressure washer by lifting the handle directly.