Operating Guide
21
MAINTENANCE
STORING THE PRESSURE WASHER
Store in a dry, covered area where the weather can’t damage it. It is important to store this
product in a frost-free area. Always empty water from all hoses, the pump, and the detergent
container before storing.
NOTE: Use of a pump saver will give you better performance and increase the life of the
machine.
QUICK WINTERIZING PROCEDURE
You can protect your pressure washer from winter damage by doing below:
• Disconnect all water connections.
• Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off
immediately.
• Do not allow high-pressure hose to become kinked.
• Store the machine and accessories in a room that does not reach freezing temperatures. Do
not store near furnace or other sources of heat as it may dry out the pump seals.
CAUTION
Drain gun assembly of any remaining water. Aim gun downwards and squeeze trigger.
SHUTTING DOWN AND CLEANING UP
• (If you are not using detergent, go directly to Step 2.) When you have finished using the
rinse it thoroughly.
• Disconnect the garden hose from the water inlet on the unit.
• Press trigger to release any remaining water pressure.
• Set the switch to “OFF” (O) position.
• Unplug the power cord from the outlet.
• Engage gun safety lock.
TAKING A BREAK
• Engage gun safety lock.
• Set unit to “OFF” (O) position.
• Unplug the power cord from the outlet.
IMPORTANT
The use of a pump protector is recommended when storing to help prevent a against freezing
over the winter months. It also help prevent the seals from drying out while sitting in storage in all
climates.