Use and Care Manual

ASSEMBLY

ATTACHING THE FRONT HANDLE(See Figure 4.)

Fig.4

BOLT

• Press the front handle onto the power head shaft so that the handle is angled toward the rear

handle.

• Place the front handle along the power head shaft to a position that allows for comfortable

operation.

• Slide the bolt through the holes in the front handle.

• Slide the washer onto the bolt.

• Place the wing nut onto the bolt and tighten the wing nut securely.

REMOVING THE ATTACHMENT FROM THE POWER HAED

For removing or changing the attachment:

• Stop the power head.

• Loosen the knob.

• Push in the button and twist the shafts to remove and separate ends.