Use and Care Manual

4
•Disconnect battery pack from tool and place the switch in the locked or off position before
making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
•Store idle tools out of reach of children and other untrained persons. Tools are dangerous in
the hands of untrained users.
•When battery pack is not in use, keep it away from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal
toanother.Shortingthebatteryterminalstogethermaycausesparks,burns,orare.
•Check for misalignment or binding of moving parts, breakage of parts, and any other condition
that may affect the tool’s operation. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
•Use only accessories that are recommended by the manufacturer for your tool. Accessories
that may be suitable for one tool may create a risk of injury when used on another tool.
SERVICE
•Toolservicemustbeperformedonlybyqualiedrepairpersonnel.Serviceormaintenance
performedbyunqualiedpersonnelmayresultinariskofinjury.
•When servicing a tool, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of shock or injury.
FOR ALL GARDEN TOOLS
•Avoid dangerous environments. Don’t use tool in damp or wet locations.
•Don’t use in rain.
•Keep bystanders and children away while operating.
•Dress properly. Do not wear loose clothing or jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear is recommended when working outdoors.
•Avoid unintentional start-ups.
•Don’t grasp the exposed cutting blade when picking up or holding the tool.
•Don’t force the tool. It will do the job better and with less likelihood of a risk of injury at the rate
for which it was designed.
•Don’t overreach. Keep proper footing and balance at all times.
•When not in use, tool should be stored indoors in a dry, high, or locked-up place – out of
reach of children.
•Maintain tool with care. Keep cutting blades clean for best performance and to reduce the risk
of injury.
•Keep guards in place and in working order.
•Keep hands and feet away from cutting blades.
•Always use eye protection, that comply with ANSI Z87.1.
SAFETY INFORMATION