Operating Guide

14
ASSEMBLY
ASSEMBLING THE WHEELS (See Figure. 4)
The wheels are used to control the depth of operation. To adjust the height of the cultivator:
1. Disconnect from power source.
2. Place cultivator in a stable position.
3. Insert the wheel assembly into the support rod.
4. Align wheel assembly hole to desired position. Slide bolt through hole and attach hitch
pin to bolt.
5. The tilling is Position A and Position B.
6. Wheels can be removed for greater tilling depth.
Fig. 4
highest lowest
POSITION A
HITCH PIN
BOLT
SUPPORT ROD
POSITION B
WHEEL ASSEMBLY